Redline Tuning QuickLIFT Installation Manual

Rev. 1.2
7/2024
21-16010
Step 1 - Unpack QuickLIFT System and verify contents.
Remove all items from the packing tube. You
should have the following before beginning:
* (2) Gas springs
* (2) Hood brackets
* (2) Ball stud/washers
* Printed Color Instructions
Please gather the following tools before you begin the installation:
* 10mm & 13mm sockets
* Socket wrench
Step 3 - Install fender ball-studs.
A. Remove fender bolt using a 10mm socket - located
just behind the upper headlight mounting bolt on the
inner fender.
B. Install fender ball-stud with the washer into this
location using a 13mm socket - deep well might be
required.
C. Repeat on passenger side.
B. Attach ball-stud/washer
This manual is property of Redline Tuning Inc. Any unauthorized duplication or use
without written permission from Redline Tuning Inc, violates Copyright laws.
QL-180-4A
32-00010
55-00030
72-00001
Copyright © 2024 Redline Tuning Inc. All Rights Reserved.
2016+ Chevy Malibu
QuickLIFT Installation Guide
55-00030
QL-180-4A
A. Remove fender bolt
C. Ball-stud mounted
32-00010
(Hood brackets)
72-00004