D-Link DKVM-2/4 User Manual page 9

Step 7.
Now make sure to verify all cables. In particular,
keyboard and mouse cables should be checked
because they are easily switched and they use the
same type of connector.
Step 8.
Attach the power supply to the DKVM-2/4 unit and
plug it into a power outlet. You will see the LED for
Port 1 light up, and you will hear a beep. Switch on
your monitor.
Step 9.
Now power up all computers simultaneously. The
first computer that is connected to port PC1 will be
shown on the monitor. You may check to see if the
mouse and keyboard work after the system has
booted up. If this is OK, use the "Select" button to
7