D-Link DKVM-2/4 User Manual page 6

Note:
Please make sure the mouse you are planning to
use is a 2 Button or 3 Button mouse, and that it is
fully Microsoft Mouse compatible. If your mouse
driver is not Microsoft mouse driver compatible,
please do not uninstall your mouse driver or the
existing driver from the PC and then install the
Windows native mouse driver.
Please follow the steps below closely and in the order as
shown, otherwise, keyboard and/or mouse errors may
occur.
Step 1.
Place the DKVM-2/4 in a convenient location. Its
small size makes it easy to place on the desktop.
Do take the length of the cables in consideration
when placing the KVM switch unit.
Step 2.
We will now connect the console devices. Connect
your monitor to the DKVM-2/4. The 15-pin
connector coming from your monitor must be
inserted into the unit on the rear panel. Connect it
to the 15 pin HDDB connector labeled
=MONITOR=.
4