System Devices - Acer Aspire 1202 User Manual

System Devices

The System Devices screen contains parameters involving your hardware devices.
Main
Pointing Device:
Ext. Keyboard "Fn":
IDE Controller:
FDD Controller:
Parallel Port:
Interrupt:
Mode:
Base I/O address:
DMA channel:
VGA Frame Buffer Size:
F1 Help
Esc Exit
The table below describes the parameters in the screen. Settings in boldface are the
default and suggested parameter settings.
Parameter
Pointing Device
Ext. Keyboard "Fn"
IDE Controller
FDD Controller
Parallel Port
IRQ
System Devices Security
[Simultaneous]
[Enabled]
[Both]
[Enabled]
[Enabled]
[IRQ 7]
[ECP]
[378]
[DMA 3]
[16 Mb]
↑↓
Select Item F5/F6 Change Values
←→
Select Menu Enter Select > Sub-Menu
Description
Determines whether or not to disable the internal touchpad if a
PS/2 pointing device is connected.
Options: Simultaneous or Auto-Selected
Allows you to simulate an Fn key on an external keyboard by
pressing the left Ctrl+left Alt keys.
Options: Enabled or Disabled
Enables or disables the primary or secondary IDE controller or
both.
Options: Both, Primary or Disabled
Enables or disables the floppy drive controller.
Options: Enabled or Disabled
Enables or disables the parallel port.
Options: Enabled or Disabled
Sets the interrupt request of the parallel port.
Options: IRQ 7 or IRQ 5
Others Boot Exit
Item Specific Help
F9 Setup Defaults
F10 Save and Exit
65