Security - Acer Aspire 1202 User Manual

66
Parameter
Mode
Base I/O address
DMA Channel
VGA Frame Buffer Size
Note: VGA takes up a portion of system memory, configurable via the VGA
Frame Buffer parameter. For example, if you have 128 MB SDRAM, and you set a
VGA Frame Buffer of 16 MB, main memory is 112 MB.

Security

The Security screen contains parameters that help safeguard and protect your
computer from unauthorized use.
Main
User Password:
Set User Password:
Password on boot:
F1 Help
Esc Exit
Description
Sets the operation mode of the parallel port.
Options: ECP, EPP or Bi-directional
Sets the I/O address of the parallel port. This parameter is
enabled only if Mode is set to ECP or Bi-directional.
Options: 378, 278 or 3BC
Sets a DMA channel for the printer to operate in ECP mode.
This parameter is enabled only if Mode is set to ECP.
Options: 3 or 1
Specifies the amount of main memory to allocate for VGA.
Options: 16 Mb, 32 Mb or 8 Mb
System Devices Security
Clear
[Enter]
[Disabled]
↑↓
Select Item F5/F6 Change Values
←→
Select Menu Enter Select > Sub-Menu
Others Boot Exit
Item Specific Help
F9 Setup Defaults
F10 Save and Exit
Software