Table of Contents
Advertisement
Quick Links
Endura
SC815E
Product Manual
www.radisys.com
World Headquarters
5445 NE Dawson Creek Drive ● Hillsboro, OR 97124 USA
Phone: 503-615-1100 ● Fax: 503-615-1121
Toll-Free: 800-950-0044
International Headquarters
Gebouw Flevopoort ● Televisieweg 1A
NL-1322 AC ● Almere, The Netherlands
Phone: 31 36 5365595 ● Fax: 31 36 5365620
97-7813-00
December 2000
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for RadiSys Endura SC815E
Summary of Contents for RadiSys Endura SC815E
- Page 1 Endura SC815E Product Manual www.radisys.com World Headquarters 5445 NE Dawson Creek Drive ● Hillsboro, OR 97124 USA Phone: 503-615-1100 ● Fax: 503-615-1121 Toll-Free: 800-950-0044 International Headquarters Gebouw Flevopoort ● Televisieweg 1A NL-1322 AC ● Almere, The Netherlands Phone: 31 36 5365595 ● Fax: 31 36 5365620...
- Page 2 The globe indicates a World Wide Web result in damage to data or the address. hardware. RadiSys is a registered trademark of RadiSys Corporation All other trademarks, registered trademarks, service marks and trade names are the property of their respective owners. December 2000 Copyright ©...
- Page 3 SC815E Endura Motherboard Product Manual Safety & Approvals Notices Battery This product contains a lithium cell. When removing or replacing the lithium cell, do not use a conductive instrument as a short- circuit may cause the cell to explode. Always replace the cell with one of the same type. This product uses a CR2032 cell.
- Page 4 Connect the equipment into an outlet on a different circuit to that of the receiver • Consult the dealer or an experienced radio/TV technician for help. Any change or modification to this product not expressly approved by RadiSys could void the approvals held by this product. Legal Directives This product complies with the relevant clauses of the following European Directives.
-
Page 5: Table Of Contents
SC815E Endura Motherboard Product Manual Contents Overview......................... 7 Motherboard Layout........................8 Block Diagram..........................10 Product Options ........................11 Configuration..........................12 1.4.1 Operation Mode Selection....................12 1.4.2 Front Panel Connections....................13 Motherboard Description ..................14 Processor ..........................14 System Memory ........................14 Chipset .............................14 Video ............................15 2.4.1 System Memory Allocation...................16 Audio ............................16 Network ............................16 IDE Drives ..........................17... - Page 6 SC815E Endura Motherboard Product Manual Motherboard BIOS....................30 Configuration..........................30 Update and Recovery ......................31 4.2.1 Creating a BIOS Update Diskette ................31 4.2.2 Updating the System BIOS ..................31 4.2.3 Creating a BIOS Recovery Diskette................32 4.2.4 Recovering the System BIOS ..................32 4.2.5 Updating the Flash Bootblock ..................32 Customization ..........................33 BIOS Error Indications ......................34 Customer Support....................
-
Page 7: Overview
SC815E Endura Motherboard Product Manual 1 Overview The SC815E is a microATX form factor motherboard based around an Intel Celeron or Pentium III processor and an Intel 815E family chipset. It integrates video, audio, system monitoring and Ethernet on a 9.0 x 7.5-inch board and is targeted at the embedded PC technology market. Its small size also enables it to be used in a FlexATX chassis. -
Page 8: Motherboard Layout
SC815E Endura Motherboard Product Manual Motherboard Layout The figure below shows the layout of the SC815E motherboard with the major components identified. Page 8 of 50... - Page 9 SC815E Endura Motherboard Product Manual Motherboard Component Identification Clock generator External audio CODEC support Keyboard header Serial port 2 header Mouse header Firmware hub (FWH) USB 1.1 channel 2 header Slot 2 – PCI 2.2 PS/2 mouse Slot 3 – PCI 2.2 10/100 Ethernet RJ45 Slot 4 –...
-
Page 10: Block Diagram
SC815E Endura Motherboard Product Manual Block Diagram The figure below shows a block diagram of the SC815E motherboard. Clocks Intel Celeron or Pentium III Processor PGA370 DIMM 1 DIMM 0 SDRAM Bus Flat Panel PanelLink (100/133 MHz) Header Controller Graphics & Memory Controller (GMCH) 1/2/4X AGP Bus... -
Page 11: Product Options
SC815E Endura Motherboard Product Manual Product Options The table below lists the product options available. Functions SC815E-V SC815E-L SC815E-FPL Audio Flat panel interface Flat panel rear connector SuperCap Each of the products is available with a choice of CPU speed. Consult the latest price list for the available options. -
Page 12: Configuration
SC815E Endura Motherboard Product Manual Configuration The majority of the configuration of the motherboard is done through the Setup utility built into the BIOS – discussed later in this document. There is, however, one jumper that controls the operation of the motherboard as described below. Operating mode Normal Configure... -
Page 13: Front Panel Connections
SC815E Endura Motherboard Product Manual 1.4.2 Front Panel Connections The primary controls and indicators for the motherboard are connected via the front panel connector using either a single ribbon cable to a 'front panel' assembly, or using a number of small PC- standard connectors. -
Page 14: Motherboard Description
For best performance, use PC133 modules with a 133MHz bus processor. When using a 100MHz bus processor, the module will always operate at 100MHz regardless of type. See the Manuals, Drivers & BIOS section on the RadiSys web site at www.radisys.com for a list of memory modules that have been tested with this product. -
Page 15: Video
SC815E Endura Motherboard Product Manual Video The video controller is integrated within the 815E chipset GMCH and provides the features listed below. • 2D graphics with full 2D acceleration • 3D graphics with extensive rendering capabilities • Hardware motion compensation for software MPEG2 decode •... -
Page 16: System Memory Allocation
SC815E Endura Motherboard Product Manual 2.4.1 System Memory Allocation The video controller does not have dedicated frame buffer memory but instead makes use of system memory for all its needs. This must be taken into account when the amount of system memory is chosen. -
Page 17: Ide Drives
SC815E Endura Motherboard Product Manual IDE Drives Two independent bus-mastering IDE interfaces are provided, each supporting ATA modes up to UltraATA/100. The following drive types are supported. • ATA hard disks up to UltraATA/100 speeds • ATAPI devices such as CD-ROMs •... -
Page 18: Infra-Red Support
SC815E Endura Motherboard Product Manual 2.9.3 Infra-red Support The SC815E motherboard supports an IrDA compliant infra-red interface via the front panel header. An IR transceiver must be added such as the Hewlett Packard HSDL-3201 or the HSDL-3610 device. The IR port shares the serial port 2 channel and thus the two ports cannot be used simultaneously. -
Page 19: Cmos Ram & Rtc
SC815E Endura Motherboard Product Manual 2.12 CMOS RAM & RTC The chipset integrates a Motorola MC146818A compatible real-time clock (RTC) and 256 bytes of CMOS RAM that is used by the BIOS to store configuration information. A replaceable primary lithium coin cell or, optionally, a Super Cap backs up both the RTC and the CMOS RAM. The former provides for approximately 5 years of unpowered backup. -
Page 20: System Management
SC815E Endura Motherboard Product Manual 2.14 System management The SC815E motherboard includes hardware system management functions integrated into the National Semiconductor PC87366 Super I/O (SIO) device. They monitor system voltages, motherboard and CPU temperatures, fan speed and control system fans. The following sections describe this in more detail. -
Page 21: Temperature Monitoring
SC815E Endura Motherboard Product Manual 2.14.2 Temperature Monitoring There are two temperature sensors on the motherboard. The first measures the motherboard temperature. Since the sensor is contained within the SIO, this will be a localized reading dominated by the motherboard surface temperature around the SIO component. The second temperature sensor is located on the processor die and thus accurately measures the local die temperature. -
Page 22: Power Management
SC815E Endura Motherboard Product Manual 2.15 Power management The SC815E motherboard implements a number of power management features with software support for APM and ACPI. Where an operating system does not support ACPI, the motherboard defaults to using APM. An APM driver is required by the operating system in order to take advantage of the APM power management features. -
Page 23: Indicators
The code is built from a number of software and data modules that can be customized and assembled with a software tool that can be provided by RadiSys. Software to support BIOS updates and crisis recovery is also available - see the Manuals, Drivers & BIOS section on www.radisys.com... -
Page 24: Specifications
SC815E Endura Motherboard Product Manual 3 Specifications Regulatory EMC Compliance The table below lists the safety regulations the SC815E motherboard complies with when correctly installed in a suitable chassis. Regulation FCC Class B (Title 47 of Code of Federal Regulations, parts 2 & 15, subpart B) EN55022:1998 Class B EN55024:1998 Regulatory Safety Compliance... -
Page 25: Industry Compliance
SC815E Endura Motherboard Product Manual Industry Compliance The SC815E motherboard implements the following industry specifications. Specification Description Revision ACPI Advanced Configuration and Power Interface Specification 1.0b Advanced Power Management BIOS Specification AC’97 Audio CODEC ’97 Component Specification ATAPI ATA Packet Interface for CD-ROMs ATX Motherboard Form Factor Specification 2.03 microATX... -
Page 26: Mechanical
FlexATX addendum, version 1.0. It measures 9.0 x 7.5 inches and is manufactured using a 4- layer PCB with components on the topside only. The screen-printing includes the following. • Product Name, RadiSys part number and RadiSys branding. • Location for serial number label •... -
Page 27: I/O Shield
SC815E Endura Motherboard Product Manual 3.6.2 I/O Shield An I/O shield is available for the SC815E when used in a standard ATX, microATX or FlexATX chassis and is illustrated below. The shield press-fits into the chassis shield aperture. The shield illustrated includes the RJ45 Ethernet aperture but not the optional flat panel display connector aperture. -
Page 28: Electrical
SC815E Endura Motherboard Product Manual Electrical 3.7.1 Motherboard Power Consumption The motherboard power consumption is highly dependent on the processors, memory and devices attached and also on the software that is running and the power state that the board is in. The figures given in the table below are designed to give the user a guide to the power requirements that should be expected under selected conditions. -
Page 29: General Purpose I/O Lines
SC815E Endura Motherboard Product Manual 3.7.2 General Purpose I/O Lines Symbol Parameter Conditions Unit Input High Voltage Input Low Voltage -0.5 Input Leakage Current µA 3.3V µA Input Hysteresis Output High Voltage = -3mA Output Low Voltage = 6mA Page 29 of 50... -
Page 30: Motherboard Bios
SC815E Endura Motherboard Product Manual 4 Motherboard BIOS 4.1 Configuration The motherboard BIOS includes a setup utility that can be used to both view and modify the board’s configuration. The settings are stored in CMOS RAM with the default settings held in the flash ROM. -
Page 31: Update And Recovery
BIOS ROM (as a result of an interrupted update, for example) to be repaired. Updates are available online from the RadiSys site in the form of a compressed image (ZIP) of a number of files. Using the software contained in the ZIP file, you must first create a flash diskette that is then used for the update or recovery process. -
Page 32: Creating A Bios Recovery Diskette
Follow the steps below. You need a PC with Microsoft MS-DOS, Windows 95, Windows 98 or Windows NT and a blank diskette. 1. Obtain the update ZIP file from the Manuals, Drivers & BIOS section on the RadiSys web site, www.radisys.com. -
Page 33: Customization
BIOS OEM kit ZIP file that can be obtained from the Manuals, Drivers & BIOS section on the RadiSys web site, www.radisys.com. The ‘Readme.txt’ file also contained in this ZIP provides updated customization information and should be read before proceeding. -
Page 34: Bios Error Indications
SC815E Endura Motherboard Product Manual 4.4 BIOS Error Indications Once the motherboard powers-up the BIOS code runs Power-On-Self-Test software to check that the motherboard is operating correctly. During this process, the code writes an 8-bit value to an error port at various code checkpoints. If a fatal error is determined, then the error code indicates the last successful checkpoint reached. - Page 35 SC815E Endura Motherboard Product Manual BIOS POST Checkpoint Codes Enable A20 Initialize hard disk controller Autosize DRAM Initialize local bus hard disk controller Initialize PMM Jump to UserPatch2 Clear 512KB base RAM Build MPTABLE for multiprocessor boards Test 512KB base address lines Install CDROM for boot Test low byte of 512KB base memory Clear huge ES segment register...
- Page 36 SC815E Endura Motherboard Product Manual BIOS POST Checkpoint Codes Enable keyboard Initialize PEM Test for unexpected interrupts PEM log Initialize PDS PEM Display Display prompt "Press F2 to enter PEM sys error initialization SETUP" CPU cache off Dual CMOS Test RAM between 512KB and 640KB Docking initialization Base Address Late docking initialization...
-
Page 37: Customer Support
RadiSys Online Support can be found at www.radisys.com and includes device drivers, BIOS updates, support software and documentation. See the Manuals, Drivers & BIOS section. RadiSys hotline numbers for the US and Canada are Support: (800) 438-4769 Service: (800) 256-5917 Online specifications and reference material:... -
Page 38: Appendix A Technical Reference
SC815E Endura Motherboard Product Manual Appendix A Appendix A Appendix A Appendix A Technical Reference Technical Reference Technical Reference Technical Reference A.1. I/O Map Address (hex)* Description 0000 – 000F DMA controller 1 0020 – 0021 Interrupt controller 1 0040 – 0043 Timer counter 0060 –... -
Page 39: Pci Interrupt Allocation
SC815E Endura Motherboard Product Manual Address (hex)* Description FFA0 – FFA7 Primary IDE bus master registers FFA8 – FFAF Secondary IDE bus master registers Dynamically assigned USB controller (32 locations on 32-byte boundary) Dynamically assigned SMBus controller (16 locations on 16-byte boundary) Dynamically assigned PCI bridge (4096 locations on a 4096-byte boundary) Dynamically assigned... -
Page 40: Isa Interrupt Allocation
SC815E Endura Motherboard Product Manual Device IDSEL Device Function Number Number Number SMBus controller USB controller 2 AC97 audio controller AC97 Modem controller Slot 1 (AGP 4X) AD16 Slot 2 (PCI 2.2) AD29 1 or 2 Slot 3 (PCI 2.2) AD27 1 or 2 Slot 4 (PCI 2.2) -
Page 41: Isa Dma Channel Allocation
SC815E Endura Motherboard Product Manual A.5. ISA DMA Channel Allocation Whilst the motherboard does not support an ISA bus, it includes an ISA-compatible DMA controller in order to be compatible with AT standard architecture. The DMA channels are allocated as described in the table below. -
Page 42: Bios Organization
SC815E Endura Motherboard Product Manual A.7. BIOS Organization The BIOS ROM is a 4Mbit device containing eight symmetrical 64KB blocks. The diagram below shows how the ROM is used to store code and control information. The addresses shown refer to the ROM image at the top of the 4GB-address space. -
Page 43: Appendix B Connector Descriptions
SC815E Endura Motherboard Product Manual Appendix B Appendix B Appendix B Appendix B Connector Descriptions Connector Descriptions Connector Descriptions Connector Descriptions B.1. Connector Part Numbers The various motherboard connectors are listed in the table below along with the part number of one of the approved vendors. -
Page 44: Agp Expansion Slot
SC815E Endura Motherboard Product Manual B.2. AGP Expansion Slot Signal Signal Signal Signal +12V USBOC# VDDQ3.3 VDDQ3.3 TYPEDET# AD22 AD21 RESERVED AD20 AD19 USB- USB+ AD18 AD17 INTA# INTB# AD16 C/BE2# RST# VDDQ3.3 VDDQ3.3 GNT# REQ# FRAME# IRDY# +3.3V +3.3V RESERVED +3.3VAUX RESERVED... -
Page 45: Pci Expansion Slot
SC815E Endura Motherboard Product Manual B.3. PCI Expansion Slot Signal Signal Signal Signal -12V AD16 AD17 +12V +3.3V C/BE2# TMS* FRAME# TDI* IRDY# TRDY# +3.3V INTA# DEVSEL# INTC# INTB# STOP# INTD# +3.3V LOCK# RESERVED PRSNT1# PERR# RESERVED +3.3V RESERVED PRSNT2# SERR# +3.3V AD15... -
Page 46: Atx Power Supply
SC815E Endura Motherboard Product Manual B.4. ATX Power Supply B.6. Parallel Port Signal Signal Signal Signal +3.3V +3.3V STB# AFD# -12.0V +3.3V ERR# INIT# PS_ON# +5.0V SLIN# +5.0V PWR_OK +5.0V +5.0VSBY +5.0V +12.0V ACK# B.5. Front Panel Header BUSY SLCT B.7. -
Page 47: Serial Port 2
SC815E Endura Motherboard Product Manual B.8. Serial Port 2 B.11. USB Channel 2 Header Signal Signal Signal DATA- DATA+ SGND FGND RING B.12. PS/2 Keyboard B.9. VGA Monitor Signal Signal DATA Signal Signal Not Used CLOCK Not Used GREEN B.13. PS/2 Mouse BLUE RESERVED RESERVED... -
Page 48: Keyboard Header
SC815E Endura Motherboard Product Manual B.14. Keyboard Header B.17. IDE Drive Headers Signal Signal Signal DATA RST# CLOCK B.15. Mouse Header Signal DATA IOW# CLOCK IOR# IORDY CSEL B.16. General Purpose I/O DAK# IRQ14 CBLID# CS1# CS3# HDACT# Signal Signal GPIO20 GPIO21 GPIO22... -
Page 49: Diskette Drive Header
SC815E Endura Motherboard Product Manual B.18. Diskette Drive Header B.20. ATAPI Telephony Signal PHONE IN Signal Signal DENSEL MONO LINE OUTPUT DRATE0 B.21. RJ45 Ethernet INDEX# MTR2# DS1# DS0# MTR0# DIR# Signal STEP# TxD+ WDATA# TxD- WGATE# RxD+ TRK0# RDATA# RxD- HDSEL# DSKCHG#... -
Page 50: Processor Fan
SC815E Endura Motherboard Product Manual B.23. Processor Fan B.27. Flat Panel Header Signal Signal Signal TXC+ POWER TX2+ TXC- TACH# TX2- SHLDC B.24. System Fan SHLD2 TX1+ TX1- SHLD1 TX0+ DDC_DAT Signal TX0- DDC_CLK SHLD0 POWER TACH# B.28. External Audio CODEC B.25.
Need help?
Do you have a question about the Endura SC815E and is the answer not in the manual?
Questions and answers