Any actions that are inconsistent with the manual are performed at your own risk and Accora shall not be liable for any injury or damage. Please ensure that the manual is available to operators throughout the use of the FloorBed head and foot end bumpers.
BMHNE-0-FL4-000 extreme temperature, flammable gases or other hazardous substances or situations. Safety Sleeve SLE-0-FL4-000 or Accora shall not be held liable for any Safety Sleeve SLE-0-FL4-100 damage, injuries or accidents arising from unauthorised modifications, non-genuine spare parts, negligence or use that is at CommunityBed Junior variance with this manual.
3. Technical specification 5. Fitting WARNING Description Bumper Set Fitting MUST be carried out by a competent person. Part number BMHNE-0-FL4-000 All functions MUST be tested and approved by a competent person after fitting. Fitting MUST take place in a clear, uncluttered Overall 900 x 800 x 100mm dimensions...
6. Fitting for use by child patients If the bed is being configured for use with a child patient the following steps must be made in addition to those detailed above to make the bed appropriate for use with children. Check that the safety sleeve and head and foot end bumpers are installed correctly according to their respective manuals.
If it is necessary to securely lock away the handset Functionality check when it is not being used, the handset should be locked (see the relevant bed manual for details of WARNING this procedure) and placed in the zipped pocket. The zip sliders should then be pulled together, and the provided padlock can be used to lock the Fitting MUST be carried out by a competent...
Need help?
Do you have a question about the Bumper Set BMHNE-0-FL4-000 and is the answer not in the manual?
Questions and answers