D-Link DES-3226 User Manual page 98

•
Save Configuration & Reboot – Saves the configuration to NV-RAM (identical to using Save
Changes) and then restarts the Switch.
•
Reboot & Load Factory Default Configuration – Restarts the Switch using the default factory
configuration. All configuration data will be lost. This is identical to using Factory Reset and then
Reboot.
•
Reboot & Load Factory Default Configuration Except IP Address – Restarts the Switch using the
default factory configuration, except the user configured IP address will be retained. All other
configuration data will be lost.
A confirmation screen will appear:
To reboot the Switch, in the mode entered above, highlight Yes and press Enter.
Figure 6-73. System Reboot confirmation screen
88
DES-3226 NWay Standalone Fast Ethernet Switch User's Guide