D-Link DES-3226 User Manual page 126

Initialize Ports(s)
This window allows you to initialize a port or group of ports. The Initialize Port Table in the bottom half
of the window displays the current status of the port(s) once you have clicked Apply.
This window displays the following information:
•
Port – The port number.
•
AuthState – The Authenticator PAE State will display one of the following: Initialize,
Disconnected, Connecting, Authenticating, Authenticated, Aborting, Held, ForceAuth, ForceUnauth,
and N/A.
•
BackendState – The Backend Authentication State will display one of the following: Request,
Response, Success, Fail, Timeout, Idle, Initialize, and N/A.
•
AdmDir – The Administrative Controlled Directions are both and in.
•
OprDir – The Operational Controlled Directions are both and in.
•
PortStatus – The status of the controlled port can be authorized, unauthorized, or N/A.
•
PortControl – The controlled port can be forceUnauthorized, auto, or forceAuthorized.
Reauthenticate Ports(s)
This window allows you to reauthenticate a port or group of ports. The Reauthenticate Port Table
displays the current status of the port(s) once you have clicked Apply.
This window displays the following information:
Figure 7-26. Initialize Port window
Figure 7-27. Reauthenticate Port window
116
DES-3226 NWay Standalone Fast Ethernet Switch User's Guide