D-Link DES-3226 User Manual page 91

DES-3226 NWay Standalone Fast Ethernet Switch User's Guide
This read-only field displays Authenticator Session-Counters information. The polling interval can be
set between 2 seconds and 1 minute using the space bar.
The information on this screen is described as follows:
•
Session Frame Rx – The number of user data frames received on this Port during the session.
•
Session Frame Tx – The number of user data frames transmitted on this Port during the session.
•
User Name – The User Name representing the identity of the client PAE.
•
Terminate Cause – The reason for the session termination. This parameter can take the following
values: Client Logoff, Port Failure, Client Restart, Reauthentication Failure, AuthControlledPortControl
set to ForceUnauthorized, Port Re-initialization, Port Administratively Disabled, and Not Terminated Yet.
•
Time – The session time is the duration of time in seconds.
This read-only field displays RADIUS Authentication information. To reset the statistics counters on
this screen, press CLEAR COUNTER. The polling interval can be set between 2 seconds and 1 minute
using the space bar.
Figure 6-62. Show Authenticator Session-Counters screen
Figure 6-63. Show Radius Authentication screen
81