D-Link DES-3226 User Manual page 90

•
OprDir – Oper Controlled Directions can be either both or in.
•
PortStatus – Auth Controlled Port Status can be Authorized, Unauthorized, or N/A.
•
Port Control – Auth Controlled Port Control can be ForceAuthorized, ForceUnauthorized, or Auto.
This read-only field displays Authenticator Statistics.
To reset the statistics counters on this screen, enter the desired ports in the Clear Port from [ ] to [ ]
field and then press CLEAR COUNTER. The polling interval can be set between 2 seconds and 1 minute
using the space bar.
The information on this screen is described as follows:
•
Tx ReqId – The number of EAP Req/Id frames that have been transmitted by this Authenticator.
•
Tx Req – The number of EAP Request frames (other than Rq/Id frames) that have been transmitted
by this Authenticator.
•
Rx Start – The number of EAPOL Start frames that have been received by this Authenticator.
•
Rx Logoff – The number of EAPOL Logoff frames that have been received by this Authenticator.
•
Rx RespId – The number of EAP Resp/Id frames that have been received by this Authenticator.
•
Rx Error – The number of EAPOL frames that have been received by this Authenticator in which
the frame type is not recognized.
Figure 6-61. Show Authenticator Statistics screen
DES-3226 NWay Standalone Fast Ethernet Switch User's Guide
80