D-Link DES-3226 User Manual page 134

The information is described as follows:
•
Time Interval [1s ] – Select the desired setting between 1s and 60s, where "s" stands for
seconds. The default value is one second.
•
Record Number [200 ] – Select number of times the Switch will be polled between 20 and 200.
The default value is 20.
•
Bytes – Counts the number of bytes received on the port.
•
Packets – Counts the number of packets received on the port.
•
Show/Hide – Check whether or not to display Bytes and Packets.
•
Clear – Clicking this button clears all statistics counters on this window.
•
View Table – Clicking this button instructs the Switch to display a table rather than a line
graph.
•
View Line Chart – Clicking this button instructs the Switch to display a line graph rather than a
table.
Figure 7-38. Rx Packets Analysis window (Table)
DES-3226 NWay Standalone Fast Ethernet Switch User's Guide
124