D-Link DES-3226 User Manual page 82

•
ReAuth:<Disabled> – Determines whether regular reauthentication will take place on this port.
Configure Radius Server
Select Configure Radius Server on the PAE Configuration menu and press Enter to access the
following screen:
This menu offers three configuration choices for the radius server.
This screen allows you to set the following features:
•
AuthProtocol: <Radius Server(Support EAP)> – Toggle between the authentication protocol
options: Radius Server(Support EAP) and Local. In Local mode, use local authenticating (based
on local user settings) rather than a remote RADIUS server.
•
Radius Dead Time:[1 ] –This specifies the number of minutes a RADIUS server which is not
responding to authentication requests is considered unavailable and is passed over by further
requests for RADIUS authentication.
Figure 6-46. Configure Radius Server menu
Figure 6-47. Configure General Radius Server Setting screen
DES-3226 NWay Standalone Fast Ethernet Switch User's Guide
72