1. Manuals
  2. Brands
  3. Tar River Manuals
  4. Farm Equipment
  5. SRB-870NW Net Wrap
  6. Operator's manual

Tar River SRB-870NW Net Wrap Operator's Manual

Mini round baler
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Mini Round Baler
SRB-870NW Net Wrap
Operator's Manual
Rel. 04/24

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SRB-870NW Net Wrap and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Tar River SRB-870NW Net Wrap

Summary of Contents for Tar River SRB-870NW Net Wrap

  • Page 1 Mini Round Baler SRB-870NW Net Wrap Operator’s Manual Rel. 04/24...
  • Page 2 Mini Round Baler SRB-870NW Page left blank intentionally...
  • Page 3 Tar River service parts, and the necessary tools and equipment to handle all your needs. Use only genuine Tar River service parts. Substitute parts will void the warranty and may not meet standards required for safe and satisfactory operation.

  • Page 4: Table Of Contents

    Mini Round Baler SRB-870NW Table of Contents Introduction …………………………………………………………………………………………….. 5 Technical Specifications ……………………………………………………………………………….. 5 Safety …………………………………………………………………………………………………… 6 Safety Signal Words ……………………………………………………………………………………. 6 General Safety Guidelines ……………………………………………………………………………… 7 Safety Decal Care ………………………………………………………………………………………. 7 Before Operation ……………………………………………………………………………………….. 8 During Operation ……………………………………………………………………………………….. 9 Highway And Transport Operations ……………………………………………………………………...

  • Page 5: Introduction

    Mini Round Baler SRB-870NW Technical Specifications Thank you for purchasing your Tar River SRB-870NW Mini Round Baler. The Tar River SRB-870NW Mini Round Baler is perfect for the small farmer who wants to produce their own hay. The SRB-870NW secures the bale with a net wrapping system that reduces material loss.

  • Page 6: Safety

    Mini Round Baler SRB-870NW Important Safety Information Safety It is important that you read the entire manual and to become familiar with this product before you begin using it. This product is designed for certain applications only. The manufacturer cannot be responsible for issues arising from modification.

  • Page 7: General Safety Guidelines

    Mini Round Baler SRB-870NW Important Safety Information General Safety Guidelines Safety of the operator is one of the main concerns in designing and developing a new piece of equipment. Designers and manufacturers build in as many safety features as possible. However, every year many accidents occur which could have been avoided by a few seconds of thought and a more careful approach to handling equipment.

  • Page 8: Before Operation

    Mini Round Baler SRB-870NW Important Safety Information How to install Safety Signs: Be sure that the installation area is clean and dry. • Decide on the exact position before you remove the backing paper. • Remove the smallest portion of the split backing paper. •...

  • Page 9: During Operation

    Mini Round Baler SRB-870NW Important Safety Information During Operation Children should not be allowed on the machine. • Clear the area of small children and bystanders before moving the machine. • If using a towing unit, securely attach implement by using a hardened 3/4” pin, a metal retainer, and safety •...

  • Page 10: Highway And Transport Operations

    Mini Round Baler SRB-870NW Important Safety Information Highway and Transport Operations Adopt safe driving practices. • Keep the brake pedals latched together at all times. Never use independent braking with machine in tow • as loss of control and/or upset of unit can result. Always drive at a safe speed relative to local conditions and ensure that your speed is low enough for an •...
  • Page 11 Mini Round Baler SRB-870NW Important Safety Information Highway and Transport Operations Maneuver the tractor or towing vehicle at safe speeds. • Avoid overhead wires or other obstacles. Contact with overhead lines could cause serious injury or death. • Avoid loose fill, rocks and holes, they can be dangerous for equipment operation or movement. •...

  • Page 12: Pto Driveline Instructions

    Mini Round Baler SRB-870NW PTO Driveline Instructions Instructions for Installing a PTO Driveline: 1. Begin by parking the tractor and implement on a level, solid surface. Attach the implement to the tractor’s hitch arms, upper and lower. Adjust the tractor’s 3-point hitch so that the tractor’s output shaft is level with the implement’s input shaft.
  • Page 13 Mini Round Baler SRB-870NW PTO Driveline Instructions Instructions for Shortening a PTO Driveline: Note: If you are not confident modifying the PTO Driveline, you should contact a Qualified Professional.  Separate the inner and outer PTO Drivelines. Leave separated at this time. ...
  • Page 14 Mini Round Baler SRB-870NW PTO Driveline Instructions Checking PTO Driveline Extended Length:  Apply multi-purpose grease to the outside of the inner driveline section. Assemble the outer and inner drivelines.  When fully extended, the maximum allowable length must have a minimum overlap of 1/3 the free length of the inner and outer sections.
  • Page 15 Mini Round Baler SRB-870NW PTO Driveline Instructions Checking for PTO Driveline Interference:  Begin with the PTO Driveline level (0 degrees). Raise the implement at an angle no greater than 25 degrees from level. Check for any interference and the length of the PTO Driveline extended. Do not exceed the maximum extended length! ...
  • Page 16 Mini Round Baler SRB-870NW Assembly Assembly NOTE: The wheels are located inside the bale opener door (at rear of the baler). See “Attaching Wheels” (page 12) for instructions on how to remove wheels from baler chamber. Attaching to a tractor: It is best to attach the baler to the tractor on a level surface.
  • Page 17 Mini Round Baler SRB-870NW Assembly Assembly Attaching wheels: The baler wheels are stored inside the baler rolling chamber at the rear of the baler for shipping purposes. The rear door is opened by the baler hydraulics. Opening rear door: Press and hold the red button on the controller to activate the hydraulic cylinder to raise the door. •...
  • Page 18 Mini Round Baler SRB-870NW Assembly Assembly Attaching wheels: Remove the wheels from the baling chamber, unlock the flow control valve and close the rear door. • Caution: Before closing the rear door make sure no one is standing near the rear of the baler. Using the tractor 3-point, lift the baler high enough to insert wheels into baler frame.

  • Page 19: Assembly

    Mini Round Baler SRB-870NW Assembly Danger: Never replace the net wrap with the tractor running! Serious injury or death is possible. Before attempting to replace the net wrap, shut off the tractor, set parking brake, make sure that all moving parts have stopped. Installing or replacing net wrap: NOTE: Replacement Net Wrap, Part Number SRBW006 Net Wrap 26”...
  • Page 20 Mini Round Baler SRB-870NW Assembly Place the leading edge of the net wrap between the metal roller and the rubber roller. Spread the Net evenly across the Winding Roller. Once the machine is operational, the net wrap will automatically wrap around the roller. Rubber Roller Danger: If the net wrap becomes entangled in the machine, DO NOT ATTEMPT TO RESOLVE THIS ISSUE WHILE THE TRACTOR...

  • Page 21: Operating Instructions

    Mini Round Baler SRB-870NW Assembly Operating Instructions Initial Preparation for Baling: The pick-up handle must be moved to the “Operation” position prior to baling. This will lower the pick-up. Pull down on handle, move the latch to the right and allow the handle to move up. NOTE: Only lower the pick -up when ready to begin baling.
  • Page 22 Mini Round Baler SRB-870NW Assembly Operating Instructions Baling: Line up tractor with the first windrow. Engage the tractor’s PTO and begin baling. • Slowly drive over the windrow. It is recommended to drive the tractor 2-3 miles per hour for best results. •...

  • Page 23: Adjustments

    Mini Round Baler SRB-870NW Assembly Adjustments Bale Density: Adjust bale density according to the tractor size, field conditions and type of material baled. • To change positions of the Connecting Rod, remove the hairpin clip and move to next hole up or down. •...
  • Page 24 Mini Round Baler SRB-870NW Assembly Adjustments Rear Door Closing Rate: If the flow control valve handle is parallel to the control valve body it is fully open. There is no restriction • of flow. Note: In the fully open position, the rear door will close rapidly. Anyone standing under or near the door could be seriously injured.
  • Page 25 Mini Round Baler SRB-870NW Assembly Adjustments After Operation: Follow the guidelines listed below after baling. Store the baler under a shelter or in a building out of the weather. • If left attached to the tractor, lower the baler so that the wheels are touching the ground. Never leave any •...
  • Page 26 Mini Round Baler SRB-870NW Assembly Adjustments Roller Chain: Roller chains will stretch during normal usage, especially during initial use of the baler. This is normal for any type of roller chain and is to be expected. Performing regular maintenance will extend the life of the chains and sprockets.
  • Page 27 Mini Round Baler SRB-870NW Assembly Adjustments Roller Chain continued: Pick-up drive chain Remove pick-up drive cover by removing the (3) threaded knobs. Adjust the pick-up drive chain tension by changing the position of the tension pulley. Chain deflection should be set at approximately 1/8”. Threaded Knobs Pick-up drive slip clutch The pick-up drive comes standard with a slip clutch to prevent damage to the baler.
  • Page 28 Mini Round Baler SRB-870NW Assembly Adjustments Pick-up Suspension: The pick-up suspension is supported by springs on both sides of the baler. Check the spring with the pick-up in the working position. The correct length of the spring is 1-7/8”. Be sure to check both springs. Adjustment to the springs is made by loosening or tightening the nuts on the rod.

  • Page 29: Maintenance

    Mini Round Baler SRB-870NW Assembly Maintenance Safety: Any maintenance is to be done with tractor engine off, baler not running. • Wear protective gear when servicing the machine, gloves, eye protection, etc. • It is best to perform maintenance with the machine on a level, solid surface. •...
  • Page 30 Mini Round Baler SRB-870NW Assembly Maintenance Lubrication Points Gearbox Fill Plug Hydraulic Reservoir Gearbox Drain Plug Hydraulic Pump Gearbox Rear door pivot Rear Door...
  • Page 31 Mini Round Baler SRB-870NW Assembly Maintenance Lubrication Points (continued) Link pivot Tension Arm Pivot Link pivot Grease Zerk Pivots and Roller Chain NOTE: On some machines the drive pulley has two holes. If your machine has two holes, DO NOT USE TWO SHEAR BOLTS! Only one shear bolt is required to function properly.

  • Page 32: Torque Specifications

    Mini Round Baler SRB-870NW Assembly Torque Specifications Notes: This chart is an approximate estimate of torque values. Always tighten hardware to these values unless a different torque value or tightening procedure is listed for a specific application. Fasteners must always be replaced with the same grade as specified in the manual. Always use the proper tool for tightening hardware: SAE for SAE hardware and Metric for Metric hardware.

  • Page 33: Parts Breakdown

    Mini Round Baler SRB-870NW Parts Manual Rel. 04/24...
  • Page 34 Mini Round Baler SRB-870NW Frame SRBW003 Baler Hatch Controller Cord (see page 11 for details) SRBW004 Complete Buzzer Cord (see page 11 for details)
  • Page 35 Mini Round Baler SRB-870NW Frame Item Part # Description Qty. 7006780004 Frame 079506500M Plate BJ10025 Flat head bolt M10x25 (10.9) hexagon socket 1334380000 Pivot pipe 0793823004 Housing 079383100M Collar BH12030 Cap (BOLT) M12x30 (10.9) BM1217530 Bolt HH M12-1.75x30 (8.8) GN0615 Grease nipple M6-1.50 FW12 Flat washer M12...
  • Page 36 Mini Round Baler SRB-870NW Frame...
  • Page 37 Mini Round Baler SRB-870NW Frame Item Part # Description Qty. 700513000F Wheel 5.3751-8 BM1217555 Bolt HH M12-1.75x55 (8.8) 000532000M 000762000M 08122600000 Collar B62052RS Bearing #6205LLU 0009190000 Tire assembly 16x6.50-8-4PR NM20 Nut M20 (4) 700057000M Uplink pin 000739000M Lynch pin 70200030000 Decal warning 65 7020040000 Decal warning 75...
  • Page 38 Mini Round Baler SRB-870NW Gearbox Fig.2 Fig.1 Note: Before ordering, determine the correct type of Input Shaft and Bevel Gear. Fig. 1 Serial #10139 and below: Input Shaft (1) and Bevel Gear (2) uses a Key (4). Fig. 2, Serial #10140 and above: Input Shaft (1) and Bevel Gear (2) have splines, no key. See Parts List for part numbers.
  • Page 39 Mini Round Baler SRB-870NW Gearbox Item Part # Description Qty. 7005870000 Shaft (PIC) w/keyway (Serial #10139 and below) 7005870000N Shaft (PIC) w/splines (Serial #10140 and above) 1114530004 Gear box 1114540004 Box frame 0740981000 Bevel gear 12T w/keyway (Serial #10139 and below) 0740981000N Bevel gear 12T w/splines (Serial #10140 and above) 0740971000...
  • Page 40 Mini Round Baler SRB-870NW Rollers...
  • Page 41 Mini Round Baler SRB-870NW Rollers Item Part # Description Qty. 079324300M Sprocket 22T 079325300M Sprocket 22T 079326200M Collar (A) 079327300M Collar (B) 0851321004 Roller (1) 0851343004 Roller (2) 0851351004 Roller (3) 0851363004 Roller (4) 079507100M Flange 081235000M Flange JCS205LLU Bearing #CS205LLU 055149300M Bi-flange 0793472004...
  • Page 42 Mini Round Baler SRB-870NW Chain Drive...
  • Page 43 Mini Round Baler SRB-870NW Chain Drive Item Part # Description Qty. 122514000M Tension arm (A) 081741000M Tension arm (B) 079331200M Tension plate BM081025 Bolt HH M8-1.00x25 FW08 Washer flat M08 00082230000 PIC cover (1) 00082510000 Ring (S) 081267000M Tension roller DC017 Snap ring #17 081742000M...
  • Page 44 Mini Round Baler SRB-870NW Pick-up Frame Section 1...
  • Page 45 Mini Round Baler SRB-870NW Pick-up Frame Section 1 Item Part # Description Qty. 1335650004 Pick-up frame 1114492004 Side plate (right) 1334510004 Side plate (left) BM0812520 Bolt HH M8-1.25x20 7007200000 Cap #9 079308100M Plate 079307300M Shaft PC050036 Split pin 5x36 LW14 Washer lock M14 BM0812525 Bolt HH M8-1.25x25...
  • Page 46 Mini Round Baler SRB-870NW Pick-up Frame Section 1...
  • Page 47 Mini Round Baler SRB-870NW Pick-up Frame Section 1 Pick-up Frame Section 1 Item Part # Description Qty. FW10 Washer flat M10 1032990000 Washer 43x3.2 LW08 Washer lock M8 FW08 Washer flat M8 NM08125 Nut M8-1.25 (8) LW10 Washer lock M10...
  • Page 48 Mini Round Baler SRB-870NW Pick-up Frame Section 2...
  • Page 49 Mini Round Baler SRB-870NW Pick-up Frame Section 2 Pick-up Frame Section 2 Item Part # Description Qty. 7006630004 Pick-up cover 0591440000 Grommet 0006900000 Grip M8x14 JCS204LLU Unit bearing #CS204LLU 085226100M Flange JPFL204G Bi-flange PFL204 133456000M Lock plate BM101565 Bolt HH M10-1.50x65 043249201M Spring 8”...
  • Page 50 Mini Round Baler SRB-870NW Pick-up Frame Section 2...
  • Page 51 Mini Round Baler SRB-870NW Pick-up Frame Section 2 Item Part # Description Qty. 0007220000 Grip 12 063275000M Spring H 063276000M Adjustment bolt M10 NM1015 Nut HH M101.50 (8) FW10 Washer flat M10 0793033004 Stay (right) CP (option) 0793053004 Stay (left) CP (option) 0793064004 Cover shield (option) 000085200M...
  • Page 52 Mini Round Baler SRB-870NW Linkage...
  • Page 53 Mini Round Baler SRB-870NW Linkage Item Part # Description Qty. 122520100M Bracket 079364300M Lever 0793652004 Bracket 079366100M Spring (H) 079368100M 079359000M Release rod 079335100M Collar LW10 Washer lock M10 LNM10 Nut lock M10 079373100M Stopper (right) 079374100M Stopper (left) BM101535 Bolt HH M10-1.50x35 NSZ08 Nut M8 (8)
  • Page 54 Mini Round Baler SRB-870NW Sheet Metal...
  • Page 55 Mini Round Baler SRB-870NW Sheet Metal Item Part # Description Qty. 1251290003 Cover (left) 1251300003 Cover (right) 1229681003 Gate cover (left) 1229711003 Gate cover (right) 0796583000 Grip #50 079659100M Coned disc spring FW08 Washer M08 PS040016 Spring pin 4x16 0009311000 Reflector R-80CL (with ref.
  • Page 56 Mini Round Baler SRB-870NW Hydraulic Section...
  • Page 57 Mini Round Baler SRB-870NW Hydraulic Section Item Part # Description Qty. 1226130000 Power package 95R 075290100M Washer #10 LW10 Washer M10 BM1012525 Bolt HH M10-1.25x25 122614100M Collar 14x6 KFD05050200 Key 5x5x20 122615000M Sprocket 40x9T FW06 Washer flat M06 LW06 Washer lock M06 BM061016 Bolt HH M06x16 1248668000M...
  • Page 58 Mini Round Baler SRB-870NW Hydraulic Section...
  • Page 59 Mini Round Baler SRB-870NW Hydraulic Section Hydraulic Section Item Part # Description Qty. 700167000M Hose swivel (male) G14xR1/4 700265000M Elbow G1/4 BM162080 Bolt HH M16-2.00x80 (4.6) LNM16 Nut lock M16-2.00...
  • Page 60 Mini Round Baler SRB-870NW Binding Base Section1...
  • Page 61 Mini Round Baler SRB-870NW Binding Base Section 1 Binding Base Section1 Item Part # Description Qty. 0812277004 Binding base (1) BM0812520 Bolt HH M08-1.25x20 079471200M Latch 079472100M Clutch bar FW12 Washer flat M12 PC032016 Split pin 3.2s16 LNM08125 Nut lock M08 NM08125 Nut HH M08-1.25 BM0812520...
  • Page 62 Mini Round Baler SRB-870NW Binding Base Section1...
  • Page 63 Mini Round Baler SRB-870NW Binding Base Section 1 Binding Base Section1 Item Part # Description Qty. FW08 Washer flat M08 PC032016 Split pin 3.2x16 126418000M Twine guide 7001470000 Buzzer 7001490000 Power line BM061020 Bolt HH M06x20 LNM0610 Nut lock M06-1.00 LW06 Washer lock M06 SRBWB001...
  • Page 64 Mini Round Baler SRB-870NW Binding Base Section2...
  • Page 65 Mini Round Baler SRB-870NW Binding Base Section 2 Binding Base Section2 Item Part # Description Qty. 1200800004 Binding base (2) BM0812520 Bolt HH M08-1.25x20 LNM08125 Nut lock M08-1.25 BM0812520 Bolt HH M08-1.25x20 079473300M Cushion base 0794741000 Cushion rubber 0194751000 Collar 079466200M Collar BM0812580...
  • Page 66 Mini Round Baler SRB-870NW Binding Base Section2...
  • Page 67 Mini Round Baler SRB-870NW Binding Base Section2 Item Part # Description Qty. FW08 Washer flat M08 LNM08125 Nut HH M08-1.25 079497100M Knife plate 1020460000 Knife NNF08 Flange nylon nut M8 TPA03006 Tapping screw A 3x6 BM0812520 Bolt HH M08-1.25x20 FW08 Washer HH M08 0794981000 Cushion rubber...
  • Page 68 Mini Round Baler SRB-870NW Net Wrap Frame Components...
  • Page 69 Mini Round Baler SRB-870NW Binding Base Section 2 Net Wrap Frame Components Item Part # Description Qty. SRBW008 Motor SRBW009 Bearing 6201 SRBW010 Push rod SRBW011 Deep groove ball bearing 628 SRBW012 Film roller SRBW013 0870 net box side plate RH SRBW014 0870 net box side plate LH SRBW015...
  • Page 70 Mini Round Baler SRB-870NW Net Wrap Frame Components...
  • Page 71 Mini Round Baler SRB-870NW Binding Base Section 2 Net Wrap Frame Components Item Part # Description Qty. SRBW030 Tensioning roller 081267000M SRBW031 Mounting sleeve 082660000M BM121530 Hexagon head bolts M12x30 FW12 Flat washer WRA12 SRBW032 Microswitch BM040712 Hexagon head bolts M4x12 FW04 Flat washer WRA4 LW04...
  • Page 72 Mini Round Baler SRB-870NW Net Wrap Roller Components...
  • Page 73 Mini Round Baler SRB-870NW Binding Base Section 2 Net Wrap Roller Components Item Part # Description Qty. SRBW040 Bearing housing 1 6206 SRBW041 Deep groove ball bearing 6206 SRBW042 Rubber roller for wrapping net 1 SRBW043 Bearing housing 2 6206 SRBW044 Gear 2.5M 15T 20PA 25 FW SRBW045...

  • Page 74: Warranty

    Mini Round Baler SRB-870NW Warranty LIMITED WARRANTY Belco Resources Equipment warrants to the original purchaser of any new piece of machinery from Belco Resources Equipment, purchased from an authorized Belco Resources Equipment dealer, that the equipment be free from defects in material and workmanship for a period of one (1) year for non-commercial, state, and municipalities’...
  • Page 75 Mini Round Baler SRB-870NW Page left blank intentionally...
  • Page 76 401 Jeffreys Road Tel: 252-822-7140 Rocky Mount, NC 27804 Fax: 252-787-5855 www.tarrivermfg.com Sales@tarrivermfg.com...

Table of Contents