Related Manuals for Foscam FNA108E-T4
Summary of Contents for Foscam FNA108E-T4
- Page 1 User Manual User Manual Model: FN9108E-T4/FNA108E-T4 Model: FN9108E-B4/FNA108E-B4 Model: FN9108H/ FN9108HE/FNA108H/FNA108HE Version: 1.2...
-
Page 2: Table Of Contents
2.1.3 USB Mouse Operation......................7 2.2 Login..............................8 2.3 Guide..............................9 2.4 Shortcut Menu..........................11 2.4.1 Channel Config........................11 2.4.2 Main Menu..........................12 2.4.3 Playback..........................12 2.4.4 Record............................ 15 2.4.5 Backup............................ 17 2.4.6 PTZ Control..........................18 2.4.7 IPC Config..........................18 2.4.8 Info............................22 2.4.9 Shutdown..........................23 www.foscam.com... - Page 3 2.5.9 Restore........................... 34 2.5.10 Upgrade..........................34 2.5.11 IPC Config..........................35 2.5.12 Channel Config........................35 3 Access the NVR in Foscam App.......................36 3.1 Download the Foscam APP......................36 3.2 Create A Foscam Account......................36 3.3 Add Device in Foscam App......................37 3.4 Foscam APP Surveillance Window....................38 3.5 Watch Live............................
- Page 4 4.5.2 Device Manager........................60 4.5.3 Application..........................62 4.5.4 System............................ 70 5 Appendix............................... 73 5.1 HDD Capacity Calculation......................73 5.2 Specifications........................... 74 5.3 FAQ..............................93 5.4 Glossary............................94 5.5 CE & FCC............................95 5.6 WARRANTY............................. 95 5.7 Statement............................99 5.8 Obtaining Technical Support....................... 100 www.foscam.com...
-
Page 5: Security Warning
The password should contain a combination of numbers, letters and special characters. Please keep the user name and password of your cameras, NVR and Foscam App account safe. Please update your device to the latest firmware regularly for an optimal user experience. -
Page 6: Important Safety Instructions
The CR1220 model lithium battery is used inside the device. If other types of batteries are used, there is a danger of explosion. When replacing the battery, do not put the old battery into fire or handle it with household garbage. Please dispose of used batteries in accordance with local laws and regulations www.foscam.com... -
Page 7: Preface
And do not open or repair it. Do not take the device apart when it is operating (or connecting to power). Please use suitable and professional hard disk to ensure continues and stable recording. www.foscam.com... - Page 8 Check the power supply to avoid damage because of voltage mismatch. Make sure the wireless NVR working within suitable temperature and humidity environment. Short circuit may occur when dust become wet on circuit board. Please clean the dust on circuit board, connectors, and NVR case. www.foscam.com...
-
Page 9: Overview
1.2 Key Features Network Monitoring You can access the NVR system remotely through the Video Management System (VMS) and Foscam APP, or access the NVR system locally by using the display or monitor. Multi-screen Preview Multi-screen preview indicates that several pages are displayed on the screen of the monitor based on the same scale. - Page 10 Only FN9108E-B4-2T kit / FN9108E-T4-2T has a 2T hard drive installed at the factory. Other Functions Support the logging function. Support local GUI output and perform shortcut operations through the mouse (left click to select, right click to return to the previous menu). www.foscam.com...
-
Page 11: Relevant Version
Step 1: Remove the cover from the NVR by unfastening the screws on the rear and bottom. Step 2: Connect one end of the data cable and power cable to the motherboard of NVR and the other end to the HDD. www.foscam.com... -
Page 12: Nvr Rear Panel
Step 3: Place the HDD on the bottom of the device and then fasten the screws on the bottom to fix the HDD. Step 4: Re-install the cover of the NVR and fasten screws. 1.5 NVR Rear Panel FN9108HE/FNA108HE/FN9108E/FNA108E: www.foscam.com... - Page 13 NVR User Manual FN9108H/FNA108H: www.foscam.com...
-
Page 14: Gui
: NVR is recording for the IPC. : You can click this icon to control whether IPC records sound. 2.1.2 Common Operations Starting Up the NVR Turn on the power, The Power indicator LED should turn green indicating that the device begins to start up. www.foscam.com... -
Page 15: Usb Mouse Operation
Action Description Left-Click Single-Click Menu or window: select and enter. Double-Click Preview mode or Playback mode: Switch between single-screen and multi-screen. Time or Area box: Select the time or zone range. Click and Drag Time bar: Drag time bar. www.foscam.com... -
Page 16: Login
2.2 Login For your security, please set a new user name and password for your NVR before Log Login page. Enter the Username and Password, then click on the OK button. You will be taken to the Setup Wizard. www.foscam.com... -
Page 17: Guide
1. Setting the system time, date format, language, resolution of the monitor and so on. 2. Format HDD. Click the Format button to set up the HDD. Note that this will delete all files on the HDD. HDD Full Setting. Select Stop Record or Overwrite. Note www.foscam.com... - Page 18 Right-click→ Main Menu → Conguration → uncheck the Setup Wizard checkbox. Click the Finish button to complete the setup wizard. Note The P2P in this article is only an example, please refer to the actual situation. You can also Right-click “Main Menu > Configuration”, uncheck the Startup Wizard checkbox. www.foscam.com...
-
Page 19: Shortcut Menu
Step 2: Select your IP Camera or Auto added IPC. Step 3: Click Add. Step 4: Enter username and password of the camera. If your camera is in the factory default state, you do not need to enter the user name and password. Step 5: Click OK. www.foscam.com... -
Page 20: Main Menu
Note: If the camera is added during factory default status, the username and password will be the same as the NVR. Select a protocol depending on which IP Camera you have. FOSCAM protocol: The High Definition (HD) IP Cameras for Foscam. ... - Page 21 Fast forward. The fast forward speed can be twice, 4 times, 8 times or 16 times of the normal playing speed. Click this button. The multiple of normal playing speed is displayed in the lower right of the playback page. For example, indicates the current playing speed is four of the normal www.foscam.com...
- Page 22 Step 5: Insert USB flash drive to the USB port located at the rear of your NVR. Step 6: Click Backup button to save the video information to the USB flash drive. Tips are available after the backup is complete www.foscam.com...
-
Page 23: Record
2.4.4.2 Event Record If you want to start event recording, select Event in Type, use the left mouse button to select the time (turned to green), if the other channels operate in the same way, select Copy. www.foscam.com... - Page 24 Playback”. Choose channel and date, then click timeline to check record. Set the event alarm according to the following methodRight-click → Main Menu → Event → Motion Detect → choose target channel, setting Schedule, Delay, Record Channel, Tour, PTZ Activation, Send Email Buzzer→ Save. www.foscam.com...
-
Page 25: Backup
If target file can not be searched out, please click empty to add. Please remove the files which is no need before backup. Ensure insert device (like USB) in 30 second, as system reserved searching time for it is 30 second. www.foscam.com... -
Page 26: Ptz Control
Right-click in live view mode and select IPC Config to enter the IPC Config-1 interface. You can set the Image, OSD, Encode, Advanced, Maintenance for the IPC. Image Choose Image to enter the Image interface, On this page you can adjust the image color mode of the monitor channel. www.foscam.com... - Page 27 Step 3: Click on the setting button, set alarm area. Step 4: Set Night Vision, default to Auto. Step 5: Set up Vehicle, Human body, White light, and Sound and Light alarm linkage according to your own needs. Step 6: Click Apply button. www.foscam.com...
- Page 28 NVR User Manual Upgrade Step 1: Download the rmware to the U disk. Step 2: Insert U disk to NVRUSB port. Step 3: click Refresh. Step 4: click Upgrade to upgrade your camera. www.foscam.com...
- Page 29 NVR User Manual Restore Step 1: Choose Restore factory settings. Step 2: click Apply to restore factory settings your camera. www.foscam.com...
-
Page 30: Info
NVR, and then click the Backup button. Right-click in live view mode and select “Info > Version”, you can view the version information of the NVR. Note The data in the figure is only an example, please refer to the actual situation. www.foscam.com... -
Page 31: Shutdown
Note Each model is slightly different, please refer to the actual interface. 2.5 Main Menu Right-click in live view mode and select Main Menu from the Shortcut Menu, the Main Menu interface is displayed. www.foscam.com... -
Page 32: Configuration
The Configuration interface is displayed. You can set the system time, date format, language, resolution of the monitor and so on. If you don't want to display the startup wizard every time you turn it on, please uncheck the Startup Wizard checkbox. www.foscam.com... -
Page 33: Preview
Step 1: Check the Enable. Step 2: Set the Event Interval(sec). Step 3: Click the add button to select which channel videos can be played within each group. Step 4: Click Save button. www.foscam.com... -
Page 34: Record
NVR system have default set 24h scheduled recording). If you want to modify it to alarm recording, please use the left mouse button to select the time (turned to green), if the other channels operate in the same way, select copy. www.foscam.com... -
Page 35: Backup
Step 2: Right-click in live view mode and select “Main Menu > Backup” in the Main Menu interface. The Backup interface is displayed. Step 3: Choose channel, type and time, Click Search button. Step 4: Select target file. Step 5: Click Backup button. www.foscam.com... -
Page 36: Network
Remarks: Users can customize the startup time or close of the NVR DHCP server. Manual setting: Select STATIC from the Network Type, fill in IP address, DNS data, and so on, click Save button. If user doesn’t familiar about the network environment, please prefer use DHCP first. www.foscam.com... - Page 37 NVR User Manual Click Setting in P2P, you can scan the UID of the device through the app, add and remotely manage the device. Click Setting in Email, you can set Email information. www.foscam.com...
-
Page 38: Hdd
Right-click in live view mode and select “Main Menu > HDD” in the Main Menu interface. The HDD interface is displayed. When the HDD is full, you can select the cycle cover the earliest recording or stop recording. You can set the video storage time. www.foscam.com... -
Page 39: User
Right-click in live view mode and select “Main Menu > User” in the Main Menu interface. The User interface is displayed. You can add user, delete user, modify user and change password. Add User Click Add User to enter the Add User interface, On this page you can add to user, user password and Authority Option. www.foscam.com... -
Page 40: Event
Right-click in live view mode and select “Main Menu > Event” in the Main Menu interface. The Motion Detect interface is displayed. On this page you can setting Channel, Scheduled, Delay and Event Trigger mode. Set the event alarm according to the following method: Step 1: Choose target channel. Step 2: Setting Schedule and Delay. www.foscam.com... - Page 41 Step 4: Click Save button to take effect. Video Loss Click Video Loss to enter the Video Loss interface. When there is no video in the channel, the NVR alarm function is triggered. On this page you can setting Channel, Schedule, and Event Trigger. www.foscam.com...
-
Page 42: Restore
Step 3: Right-click in live view mode and select “Main Menu > Upgrade” in the Main Menu interface. Step 4: Click Refresh button in the Upgrade interface. Step 5: Select the firmware from the USB flash drive. Step 5: Click Upgrade to upgrade your NVR. www.foscam.com... -
Page 43: Ipc Config
Encode, Advanced, Maintenance for the IPC. For detailed operation, please refer to 2.4.7 IPC Config. 2.5.12 Channel Config Right-click in live view mode and select “Main Menu > Channel Config” to enter the Pair IP Camera interface . please refer to 2.4.1 Channel Config. www.foscam.com... -
Page 44: Access The Nvr In Foscam App
Scan the QR code below to download and install the Foscam APP. 3.2 Create A Foscam Account You can create a Foscam account for the first time. Run the Foscam APP, and then register for a Foscam account. Step 1: Click Foscam app icon to enter the login page. Click Sign Up to create account. -
Page 45: Add Device In Foscam App
3.3 Add Device in Foscam App Open the foscam APP and please sign in if you have one already. After logging into Foscam APP, select "+" icon on the upper right corner. The Add Devices interface is displayed. -
Page 46: Foscam App Surveillance Window
Neither FN9108E-B4 kit/ FN9108E-T4 kit nor FN9108H/9108HE supports DDNS connection. After the addition is successful, NVR video will be displayed in the Foscam app. 3.4 Foscam APP Surveillance Window You can start to learn about software operation after finish quick installation.When you launch the Foscam App, the devices page displays. - Page 47 Setting: Click this button to set more. Date：Display the date. Full screen: Click this full screen button, you can live in full screen. Bit Rate: You can see the current connection bit rate. Mirror: You can flip the image horizontally/vertically with this button. www.foscam.com...
-
Page 48: Setting
You can modify the NVR name. You can also see the basic information of the NVR through this, such as NVR model, UID, MAC ID, NVR firmware version information, IPC firmware version information. Note The data in the figure is only an example, please refer to the actual situation. www.foscam.com... -
Page 49: Nvr Firmware
When the HDD is full, you can check the Loop Coverage to select the cycle cover the earliest. You can see the HDD information of the NVR. You can format the hard information by clicking the Format the hard disk button. www.foscam.com... -
Page 50: Reboot Nvr
Click Reboot NVR to reboot the NVR. This is similar to unplugging the power to the NVR. 3.6.7 Delete NVR You can click Delete NVR button to delete the NVR from the app, or delete and keep history files from the app. www.foscam.com... -
Page 51: Surveillance Software Foscam Vms
NVR User Manual Surveillance Software Foscam VMS Foscam VMS is a new tool for PC. It does not require plug-ins and is compatible with Windows & Mac, It supports all Foscam HD cameras and up to 36 cameras at the same time. -
Page 52: Create A Local Account
NVR User Manual 4.2 Create A Local Account Local with Foscam Account Click the “Local with Foscam Account” button and you will create a local account to manage your camera. www.foscam.com... -
Page 53: Add Device
NVR User Manual Login with Local Account Click the “Login with Local Account” button, and you will need to use the Foscam account and password to log in, which is consistent with the Foscam app account. 4.3 Add Device If your NVR is wired connect, you can choose the following method to add to Foscam VMS. -
Page 54: Lan Add
Step1 Select “ALL” from the device types. Step2 Click the IP address of the NVR on the list, then the name of the NVR and the IP information will be entered automatically. Step 3 Click Add. www.foscam.com... -
Page 55: Manual Add
NVR User Manual Step 4 Enter the username and password of the NVR. Step 5 Click Add button to finish adding. 4.3.2 Manual add You can add the NVR use manual add. Step 1 Click Manual add first. www.foscam.com... - Page 56 Step 2 There are three ways to connect mode, you can choose any one. Check UID from Connection mode. Enter the UID of the device. Check IP address from the Connection Mode. Enter the IP and Port of the NVR. Select NVR from the Device types. www.foscam.com...
- Page 57 NVR User Manual Step 3 Click Add button. Step 4 Enter Device account and Password of the NVR. Step 5 Click Add button to finish adding device. www.foscam.com...
-
Page 58: Surveillance Software Gui
Playback the video recording, you can choose Cloud Playback, SD Card Playback, NVR HDD Playback or Local Playback. Login your Foscam cloud account to view alerts. Login your Foscam cloud account. Add Device, please refer chapter 4.3 Add Device for the detail setting. - Page 59 Click this button, you can move the device to your group list. 3-----NVR HDD Playback If you have an HDD on your device, click this button to enter the NVR HDD Playback. You can query the recording information of the hard disk by channel, record type, and date of record. www.foscam.com...
- Page 60 Click Setup button, goes to Device Settings Control Panel to make advanced NVR settings. Section3 Live Window When the mouse is placed on the video, the icon shown on the following figure appears. 1-----Close Click the icon to close this channel live window 2-----Device Name Show view channel and camera name. www.foscam.com...
- Page 61 Section5 Live Cruise / Close All / Full Screen / Hide Bar Live Cruise ----- Click this button to Live Cruise, you can click button to add a loop page for live Cruise or click button to reduce the loop page for live Cruise. www.foscam.com...
-
Page 62: Setup
Device name: The Device Name is a unique name that you can give to your device to help you identify it. You can define a name for your NVR here such as NVR1. Click Save to save your changes. The alias name cannot contain special characters. www.foscam.com... - Page 63 Use DST: Select the use DST (Daylight Saving Time, to set the clock ahead of the real-time), then set the start time and end time of the DST, select the daylight saving time from the drop-down menu at last. Click Save button and submit your settings. www.foscam.com...
- Page 64 It is recommended that you use the subnet mask, gateway and DNS server from your locally attached PC. If you don't know the subnet mask, gateway and DNS server, you can check your computer's local area connection as follows: Settings--Network & internet--Ethernet --Edit--Edit IP Settings. www.foscam.com...
- Page 65 NVR User Manual www.foscam.com...
- Page 66 This device supports HTTP Port / HTTPS Port Port. HTTP Port is used to access the device remotely. HTTP port: By default, the HTTP is set to 88. Also, they can be assigned with another port number between 1 and 65535. But make sure they can not be conflict with other existing ports. www.foscam.com...
- Page 67 NVR User Manual Mail If you want the NVR to send emails when motion has been detected, here mail will need to be configured. 1----- SMTP server/ Port Enter SMTP server for sender. SMTP port is usually set as 25. www.foscam.com...
-
Page 68: Device Manager
Select the channel in the channel list box, enter the device information, click the add button, and the system will prompt for success. Garden Corridor Garden(10.66.238.180) Garden Corridor(10.66.207.83) Device account/Password： The Device account/Password is the user name and password you set when you first logged in to the NVR system using the monitor. www.foscam.com... - Page 69 If your hard disk is full, you can check whether to Stop recording or Cover earliest record. After the modification is completed, click Save button to take effect. System logs You can query the Alarm logs, Operation logs and System log of the NVR. www.foscam.com...
-
Page 70: Application
Full in one page number, click GO button and go to the corresponding page. 4.5.3 Application Motion detection The NVR supports Motion Detection Alarm, when the motion has been detected, it will send emails. www.foscam.com... - Page 71 Mail Settings first. Make sure you have set E-mail in “Device Setting -> Basic -> Mail” interface. Recording If you select this checkbox, when the motion has been detected, the NVR will recording and store in HDD. Buzzer www.foscam.com...
- Page 72 Click the week day words, the corresponding column will be selected. For example, click TUE, the all column of TUE turns to red, that means during Tuesday whole day, when something moving in the detection area, the NVR will alarm. www.foscam.com...
- Page 73 Press the left mouse and drag it on the time boxes, you can select the serial area. 9 Click Save button to take effect. When the motion is detected during the detection time in the detection area, the NVR will alarm and adopt the corresponding alarm indicators. www.foscam.com...
- Page 74 Select the recording channel. Check the Enable schedule checkbox, then you can set the schedule for recording. Click Save button to take effect. HDD Alarm When the hard disk is error, lose or full, you can set the NVR alarm. www.foscam.com...
- Page 75 NVR User Manual Video Loss When the video is lost, you can set an alarm message. To enable motion detection, follow the steps below: 1 Channel---- Select the channel. www.foscam.com...
- Page 76 Buzzer If you select this checkbox, when the video has been loss, the NVR will alert the buzzer. This page is used to add time and device name on the video. Video encode This is main/sub stream video settings. www.foscam.com...
- Page 77 25 fps. When the video format is 60Hz, the maximum frame rate is 30 fps. You should lower frame rate when the bandwidth is limited. Normally, when the frame rate above 15, you can achieve fluently video. Click Save button to take effect. Color adjustment You can adjust the settings to your liking. www.foscam.com...
-
Page 78: System
NVR User Manual 4.5.4 System System upgrade Click Download the Latest Firmware, you will see the following screen. And click Save to save the firmware on your computer locally. www.foscam.com... - Page 79 Click Browse, choose the correct bin file and then click upgrade. Don't shut down the power during upgrade. After upgrading, you can see the upgrade result. Factory reset Click Factory Reset button and all parameters will return to factory settings if selected. www.foscam.com...
- Page 80 NVR User Manual Reboot Click Reboot device to reboot the NVR. This is similar to unplugging the power to the NVR. www.foscam.com...
-
Page 81: Appendix
If you select 4M for the bit rate and select four channels for recording and one week of recording is needed, you can calculate the HDD capacity by using the following formula: Recording time(hour) =7days*24 hours=168 hour Mbit 3600 Spent of HDD Capacity per hour(M/hour)= =1800M/hour www.foscam.com... -
Page 82: Specifications
Up to 16TB Network Interface 1× 10/100 Mbps RJ45 port External USB Interface 2× USB2.0 interface for mouse and external storage Interface Button 1× Power on/off button,1× Reset button System Operating System Microsoft Windows (Foscam VMS), MacOS (Foscam VMS), www.foscam.com... - Page 83 NVR User Manual Requirements Android (Foscam app),iOS (Foscam app) Smart Phone iOS,Android,3G/4G/5G Smartphones Language Language 17 languages Power Supply DC 48V/2A Dimension(LxWxH) 255mm*238mm*50mm Net Weight (g) 880g Physical and Operating Temperature 0°C ~ 55°C (32°F ~ 131°F) Environmental Operating Humidity 20% ~ 85% non-condensing Storage Temperature -20°C ~ 60°C (-4°F ~ 140°F)
- Page 84 1× 10/100 Mbps RJ45 port External USB Interface 2× USB2.0 interface for mouse and external storage Interface Button 1× Reset button Microsoft Windows (Foscam VMS), MacOS (Foscam VMS), Operating System System Android (Foscam app), iOS (Foscam app) Requirements Smart Phone iOS, Android, 3G/4G/5G Smartphones...
- Page 85 1× 10/100/1000Mbps RJ45 port External USB Interface 2× USB2.0 interface for mouse and external storage Interface Button 1× Power on/off button,1× Reset button Microsoft Windows (Foscam VMS), MacOS (Foscam VMS), Android Operating System System (Foscam app),iOS (Foscam app) Requirements Smart Phone iOS,Android,3G/4G/5G Smartphones...
- Page 86 External Interface USB Interface 2× USB2.0 interface for mouse and external storage Button 1× Reset button Operating Microsoft Windows (Foscam VMS), MacOS (Foscam VMS), Android System System (Foscam app), iOS (Foscam app) Requiremen Smart Phone iOS, Android, 3G/4G/5G Smartphones Language...
- Page 87 Playback Playback Playback Mode Pause / Stop / Slow / Fast/ Frame Play Capacity Up to 16TB POE Standard IEEE 802.3at/af Network Network IP, TCP, UDP, SMTP, DHCP, RTSP Protocol External Network 1× 10/100 Mbps RJ45 port Interface Interface www.foscam.com...
- Page 88 High Definition Color CMOS Sensor Image Display 5.0Megapixels(3072*1728) Sensor Resolution Min. Illumination 0 Lux (With IR Illuminator) Lens Type f:4mm;F2.1 Night Vision Lens Manual and automatic modes,when the white light is on, the night vision Night mode image is colored www.foscam.com...
- Page 89 √ Detection Day/Night √ √ Zoom 6X digital zoom function Spotlight √ Operating Microsoft Windows (Foscam VMS), MacOS (Foscam VMS), Android System System (Foscam app), iOS (Foscam app) Requiremen Smart Phone iOS, Android, 3G/4G/5G Smartphones Waterproof IP66 Physical Net Weight 342g www.foscam.com...
- Page 90 IP Video Input 8 Channels QHD IP camera input HDMI Output 1×HDMI VGA Output 1×VGA Video Output Display 3840x2160,2560x1440,1920x1080,1440x900,1280x1024,1280x800,1280x7 Resolution 20,1024x768 Recording Up to 5MP per channel ( 8ch@5MP ) Resolution Recording Record Mode Time Scheduled / Motion Detect Compression H.264/H.264+ www.foscam.com...
- Page 91 Power Supply DC 48V/2A Dimension(LxW 255mm*238mm*50mm Net Weight (g) 880g Physical Operating 0°C ~ 55°C (32°F ~ 131°F) Temperature Environmen Operating 20% ~ 85% non-condensing Humidity Storage -20°C ~ 60°C (-4°F ~ 140°F) Temperature Storage 0% ~ 90% non-condensing Humidity www.foscam.com...
- Page 92 Diagonal: 94°, Horizontal: 78°, Vertical: 43.6° Input/Output Built-in mic and speaker Audio Audio PCM/AAC Compression Siren Support maximum 100dB alarm siren IEEE 802.3at/af √ Connectivit Ethernet RJ45 Video Format H.264/H.264+ Multi-Stream Dual streams Software Motion √ Features Detection Human √ Detection www.foscam.com...
- Page 93 √ Detection Day/Night √ √ Zoom 6X digital zoom function Spotlight √ Operating Microsoft Windows (Foscam VMS), MacOS (Foscam VMS), Android System System (Foscam app), iOS (Foscam app) Requiremen Smart Phone iOS, Android, 3G/4G/5G Smartphones Waterproof IP66 Net Weight 380g...
- Page 94 IP, TCP, UDP, SMTP, DHCP, RTSP Protocol Network 1× 10//100/1000 Mbps RJ45 port Interface External USB Interface 2× USB2.0 interface for mouse and external storage Interface Button 1× Power on/off button,1× Reset button Language Language 17 languages Physical Power Supply DC 48V/2A www.foscam.com...
- Page 95 F1.6 Night Vision Lens Manual and automatic modes,when the white light is on, the night vision Night mode image is colored Angle of view Diagonal: 108.5°, Horizontal: 90.1°, Vertical 46.2° Input/Output Built-in mic and speaker Audio Audio PCM/AAC Compression www.foscam.com...
- Page 96 √ Detection Day/Night √ √ Zoom 6X digital zoom function Spotlight √ Operating Microsoft Windows (Foscam VMS), MacOS (Foscam VMS), Android System System (Foscam app), iOS (Foscam app) Requiremen Smart Phone iOS, Android, 3G/4G/5G Smartphones Waterproof IP66 Physical Net Weight...
- Page 97 10% ~ 80% non-condensing Humidity Storage -20°C ~ 60°C (-4°F ~ 140°F) Temperature Storage 0% ~ 90% non-condensing Humidity ITEMS FNA108E (FNA108E-T4) Video Input IP Video Input 8 Channels UHD IP camera input HDMI Output 1×HDMI VGA Output 1×VGA Video Output...
- Page 98 0°C ~ 55°C (32°F ~ 131°F) Temperature Environmenta Operating 20% ~ 85% non-condensing Humidity Storage -20°C ~ 60°C (-4°F ~ 140°F) Temperature Storage 0% ~ 90% non-condensing Humidity ITEMS T8EPP(FNA108E-B4) Sensor Type High Definition Color CMOS Sensor Image Sensor Display 8.0Megapixels(3840*2160) www.foscam.com...
- Page 99 Built-in mic and speaker Audio Audio PCM/AAC Compression Siren Support maximum 100dB alarm siren IEEE 802.3at/af √ Connecti vity Ethernet RJ45 Video Format H.264/H.264+ Multi-Stream Dual streams Motion √ Detection Software Human √ Features Detection Vehicle √ Detection Day/Night √ √ www.foscam.com...
- Page 100 NVR User Manual Zoom 6X digital zoom function Spotlight √ Operating Microsoft Windows (Foscam VMS), MacOS (Foscam VMS), Android System System (Foscam app), iOS (Foscam app) Requirements Smart Phone iOS, Android, 3G/4G/5G Smartphones IP66 Waterproof Net Weight 380g Power Powered by PoE NVR Power 5 Watts (Max.)
-
Page 101: Faq
5. Why can't video files be downloaded during video playback or downloaded files cannot be played back properly? To save consumed resources, the server limits concurrency of video playback and file download. In this case, stop video playback and then download files or play back videos after video files are downloaded. www.foscam.com... -
Page 102: Glossary
A NVR can be a PC-based or embedded system used for Recorder centralized management and storage for IP cameras. Video Foscam VMS is a new tool for PC. It does not require plug-ins Management and is compatible with Windows & Mac, It supports all Foscam System HD cameras and up to 36 cameras at the same time. -
Page 103: Ce & Fcc
5.6 WARRANTY FOSCAM values your business and always attempts to provide you the very best of service. No limited hardware warranty is provided by FOSCAM unless your Foscam product ("product") was purchased from an authorized distributor or authorized reseller. - Page 104 NVR User Manual returned to an authorized return center in the region where the product was first shipped by FOSCAM or to the point-of-purchase, which may have regional specific warranty implications. If you purchase your Foscam product from online store, please contact the point-of-purchase and ask for return / replacement / repair service.
- Page 105 Warranty is void if damaged by the use of parts not manufactured or sold by FOSCAM. Damage caused by improper installation of third-party products.
- Page 106 Foscam, shall be the repair or replacement of defective parts. If Foscam lists a product on its website specification in error or that is no longer available for any reason, Foscam reserves the right to explain it without incurring any liability.
-
Page 107: Statement
Without the prior written permission of my company, all the contents of relevant operating instructions manual affiliated to the product must not be reproduced, transmitted, transcribed or stored in a retrieval system, or translated into other languages. Our company will reserve the right to improve and modify the product and corresponding manuals. www.foscam.com... -
Page 108: Obtaining Technical Support
CE Certificate statement Website: https://www.foscam.com/company/ce-certificate.html Exporter and Importer Information Opened to Public: https://www.foscam.com/company/open-information.html www.foscam.com Manufacturer: Shenzhen Foscam Intelligent Technology Co., Ltd Addr: : Room 902,Building 1B, Shenzhen International Innovation Valley, Xingke 1st Street, Nanshan District, Shenzhen, Guangdong, China, 518055 www.foscam.com...
Need help?
Do you have a question about the FNA108E-T4 and is the answer not in the manual?
Questions and answers