Spinning; Final Spin Speed; Rinse And Interim Spin; To Omit The Final Spin (Rinse Hold) - Miele W 3922 WPS Operating Instructions Manual

Final spin speed

Programme
Cottons
Minimum iron
Delicates
Woollens
Automatic
Shirts
Express
Denim
Hygiene
Dark garments
Curtains
Pillows
Silks
Sportswear
Outerwear
Proofing
Drain / Spin
Separate rinse
Starch
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that shown in the
chart above.

Rinse and interim spin

There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed. If a spin speed of
less than 700 rpm is selected in the
Cottons and Hygiene programmes, an
additional rinse is introduced.

To omit the final spin (Rinse hold)

^ Press the Further extras button and
rpm
select the Rinse hold setting. The
1600
laundry will not be spun and will
1200
remain suspended in the final rinse
600
water. This reduces creasing if the
1200
laundry is not going to be removed
1200
from the drum immediately after the
600
end of the programme.
1600
– To start the final spin:
900
The washing machine will display the
1600
maximum spin speed possible. You
1200
can select a spin speed lower than
600
this. Start the final spin by pressing
1200
the Start/Stop button.
400
– To end the programme:
1200
800
Press the Door button. The water will
1000
drain away. Press the Door button
1600 again to open the door.
1200
To omit rinse and interim spin and
1500
the final spin (No spin)
^ Select No spin from the spin speed
menu. The laundry is not spun after
the final rinse. The water will drain
away and the machine will go straight
into the anti-crease stage. An
additional rinse is introduced if this
setting is selected with the Cottons ,
Hygiene , Minimum iron , Express and
Automatic programmes.

Spinning

23