Description; Installation - Polypipe UFHBOOSTWP User Manual

User's manual
II.

Description

UFHBOOSTWP room thermostat is intended for cooperation with UFH8ZMP wiring Centre.
UFHBOOSTWP room thermostat are installed in particular heating zones.
Temperature information sent by them to the external controller is used to control the
thermostatic valves (by opening them when the room temperature is too low and closing
them when the pre-set room temperature has been reached).
The current temperature is shown on LED display. The pre-set zone temperature
may be changed permanently or for a specifi ed period of time from the room thermostat.
Controller equipment:
• LED display
• built-in temperature thermostat
• wall-mountable cover
• light sensor
III. Installation
The controller should be installed by a qualifi ed person.
WARNING
Risk of fatal electric shock from touching live connections. Before working on
the controller switch off the power supply and prevent it from being accidentally
switched on.
WARNING
Incorrect connection of the wires may damage the regulator!
230V 50Hz
Power
6V DC
Supply
4