Table of Contents
Advertisement
Quick Links
ENglISH VErSIoN
Important!
• Do not expose the Sweex Wireless 300N Adapter USB to extreme temperatures. Do not place the device in direct sunlight or in the direct vicinity
of heating elements.
• Do not use the Sweex Wireless 300N Adapter USB in extremely moist or dusty surroundings.
• Protect the device against powerful shocks and falls – they may damage the internal electronics.
• Never attempt to open the device yourself, there are no serviceable parts inside. Opening the device will cause the warranty to lapse.
Package contents
In this package you will find:
• Wireless 300N Adapter USB
• CD with driver, software and this manual
If you find that any of the package contents are missing, please return the package to the sales point where it was bought.
Terminology list
This manual will contain a number of technical terms. It is important to know what they mean before you begin
installing and configuring the adapter.
• Adapter: This is the Sweex Wireless 300N Adapter USB, the product you have just bought.
• Wireless network: Wireless networks are based on the Wi-Fi standard. The adapter enables you to connect to Wi-Fi networks at a speed of up to
300Mbps, provided that the network supports this speed (or higher)
• (wireless)Adapter, modem, access point: These are devices (amongst others) can transmit a wireless network signal.
• Wireless security: Wireless security is a form of protection for wireless networks that allows only authorized devices access to the network and
prevents eavesdropping. There are several different forms of wireless security, as is explained further on in this manual.
Installation Windows XP, Vista and 7
Place the Sweex CD in the CD player, click "Drivers and Software" and follow the instructions on screen.
2
LW313 Sweex Wireless 300N Adapter USB
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for SWEEX LW313
Summary of Contents for SWEEX LW313
-
Page 1: Package Contents
LW313 Sweex Wireless 300N Adapter USB Important! • Do not expose the Sweex Wireless 300N Adapter USB to extreme temperatures. Do not place the device in direct sunlight or in the direct vicinity of heating elements. • Do not use the Sweex Wireless 300N Adapter USB in extremely moist or dusty surroundings. -
Page 2: Setting Up The Wireless Network
In most cases this is the wireless adapter, modem or access point. By means of a WEP or WPA security code you can secure your network. This code is also called the network key. Enter this code on every computer that wants to connect to the secured network. -
Page 3: Connecting To A Wireless Network
The Sweex Utility will appear. Click on the “WPS Setting” tab, you should see the following screen: To connect to a WPS secured network, first press the WPS button on your adapter, then click the “PBC” button in the Sweex Utility. The utility will automatically find your network and establish a WPS secured connection to it. -
Page 4: Windows Vista
Note: If you see a red cross near the network and the text: “The settings saved on this computer for the network do not match the requirements of the network”, please refer to the troubleshooting section of this manual. -
Page 5: Troubleshooting
Windows 7 will indicate when wireless networks are available. You can recognise this by the following icon in the bottom-right of your screen: Note: If you see a small red cross through the icon, no networks are in range of your computer. Please consult the troubleshooting section of this manual if this is the case. - Page 6 1 Click the start button at the bottom right of your screen and click “Control Panel” 2 In the control panel, click “Network and Internet Connections and open the “Network Connections” icon. If your control panel is in Classic View, you may open the “Network Connections”...
- Page 7 ENglISH VErSIoN 4 The connection’s property window appears. In this windows, select the “Internet Protocol” from the list of items and click the “Properties” Button: 5 The Internet Protocol’s property window appears. In this window, ensure that both settings are set to “Obtain automatically”:...
- Page 8 1 Click the start button at the bottom right of your screen and click “Control Panel” 2 In the Control Panel, click “View network status and tasks”. If your Control Panel is in classic view, open the “Network and Sharing Center” icon: 3 The Network and Sharing Center window should now open.
- Page 9 If you have multiple connected connections, repeat steps 4 to 7 for each connection: 5 The connection’s property window appears. In this windows, select the “Internet Protocol Version 4” from the list of items and click the “Properties”...
- Page 10 1 Click the start button at the bottom right of your screen and click “Control Panel” 2 In the Control Panel, click “View network status and tasks”. If your Control Panel is in icon view, open the “Network and Sharing Center” icon: 3 The Network and Sharing Center window should now open.
- Page 11 ENglISH VErSIoN 4 Right click the first connected connection, in this example the “Local Area Connection”, and click “Properties” from the context menu. If you have multiple connected connections, repeat steps 4 to 7 for each connection: 5 The connection’s property window appears. In this windows, select the “Internet Protocol Version 4” from the list of items and click the “Properties”...
- Page 12 The “Internet Options” window will now open. In this window, click the “Connections” tab and in this tab, the “LAN Settings” button. The “LAN Settings” window will now open. Ensure that all checkboxes are unchecked and confirm the settings by clicking “OK”...
- Page 13 I try to connect. wirelessly. • This problem can be solved as follows: In the Control Panel, click “View network status and tasks”. If your Control Panel is in classic view, open the “Network and Sharing Center” icon: The Network and Sharing Center window should now open.
- Page 14 In the Network and Sharing Center, click “Manage wireless networks”: The following window will appear, right click the network that was indicated with a red cross in step 2 and click “Remove network”: After the network has been removed, you can close the window and follow the steps described in the “Connecting to a wireless network”...
- Page 15 ENglISH VErSIoN...
- Page 16 ENglISH VErSIoN...
Need help?
Do you have a question about the LW313 and is the answer not in the manual?
Questions and answers