Homebase LINDO Manual

LINDO DELUXE MIRROR CABINET
IMPORTANT INFORMATION
•
Check the product for any signs of damage and remove any protective film.
•
It is recommended that this product is fitted by a suitably qualified Part P registered electrician in accordance with current IEE &
Building Regulations.
•
It is the installer's responsibility to carry out a thorough assessment of wall type and the weight of the cabinet and use appropriate
fixings.
•
Care should be taken when drilling walls to avoid any hidden wires or pipes.
•
To prevent the cabinet falling down this product must be fixed using the wall attachment device provided.
•
Please check you have all the components and fittings. If you find any missing or damaged parts, please contact our customer services
team on 0333 003 7084 between 09:00 & 18:00, or use the contact form on our website www.homebase.co.uk
•
The terminal block used to connect the leads to the electrical supply can be of either the screw- or screw-less type and should be
rated at 240V 6A with 4 terminals. The cable tails do not need to be crimped when connected to the terminal block.
•
The driver can be screwed to the internal top rail of the cabinet or left to hang in the void between the cabinet and the wall.
•
This product should be used only with mains supply that is protected by a 30mA Residual Current Device.
CONNECTION TO MAINS ELECTRICS
1. Turn off the electrical supply.
2. Connect the electrical supply in the bathroom to the shaver socket transformer cable (A). It is recommended that the shaver socket is
connected to a constant feed. Connect the push-fit cable from the shaver socket transformer to the cable from the rear of the shaver
socket.
3. Turn the electrical supply back on and check that the shaver socket functions as required.
WARNING
RISK OF ELECTRIC SHOCK
Turn off Mains Electric prior to commencing work.