Download Print this page

Razor POWER CORE E90 SPRINT Manual

Battery replacement procedures

Download this manual

Required Tools: (Not included)

A. Phillips screwdriver

WARNING

CAUTION: To avoid potential shock or other injury, turn power switch OFF and disconnect

charger before conducting any assembly or maintenance procedures. Failure to follow these

steps in the correct order may cause irreparable damage.

Step 1

Using a Phillips screwdriver, remove the five (5) screws

from the side with the power switch.

Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Pacific Time.

POWER CORE E90 SPRINT BATTERY

REPLACEMENT PROCEDURES

Step 2

Pull the cover off. Be careful not to damage the wires for

the charger port and power switch. Set cover aside.

PART # W20136401003

Need help?

Do you have a question about the POWER CORE E90 SPRINT and is the answer not in the manual?

Page 1 Pull the cover off. Be careful not to damage the wires for from the side with the power switch. the charger port and power switch. Set cover aside. Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Pacific Time.
Page 2 • Place the Bracket back on the top of the battery • Re-attach battery cover with screws. ATTENTION: Charge battery 12 hours before using. Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Pacific Time.