Troubleshooting Guide - Haier WDQS015 - INSTALLATION REV 03-04 Installation Instructions Manual

English

Troubleshooting Guide

The unit does not operate.
• Check if your water dispenser is plugged in.
• Check the circuit breaker and the fuse to make sure there is power at the outlet.
The unit is plugged in but the indicator lights are not illuminated.
• Read the "Replacing the Fuse" section on page 17.
There is no water from the faucet.
This is due to an improper setting of the water bottle or from blocked airflow.
• Adjust the position of the bottle properly on the water bottle guard so the air
opening is not blocked.
There is no hot water coming from the faucet.
• Too much hot water was used in too short a period of time.
• You may need to wait awhile for more water to be heated.
• Check if the hot water switch is in the ON position.
The water is not cool.
This is due to either a compressor malfunction (for units with compressor) or the cold
water switch may be in the OFF position.
• Check if the cold water button is in the ON position.
20