Maintenance - OBSIDIAN CONTROL SYSTEMS NETRON BS10 Installation Manual

M A I N T E N A N C E
The Obsidian Control Systems Netron BS10 is designed as a rugged
device. The only required service is occasional cleaning. For other
service-related concerns, please contact your Obsidian Control
Systems dealer, or visit www.obsidiancontrol.com.
Any service that is not described in this guide must be carried out by
a trained and qualified Obsidian Control Systems technician.
As any controller, the BS10 requires periodic cleaning. The schedule
relies on the environment in which the controller is operated. An
Obsidian Control Systems technician can provide recommendations
if necessary.
Never spray cleaner directly onto the device surface; always spray
into a lint-free cloth and wipe it clean. Consider using cleaning
products designed for cellphone and tablet devices.
Important! Excessive dust, dirt, smoke, fluid build-up,
and other materials can degrade the performance of
the BS10 device, causing overheating and damage
to the unit that is not covered by the warranty.
16