C O N T E N T S GENERAL INFORMATION LIMITED WARRANTY (USA ONLY) SAFETY GUIDELINES OVERVIEW SOFTWARE PC SYSTEM SETUP CONNECTIONS MAINTENANCE SPECIFICATIONS DIMENSIONS...
G E N E R A L I N F O R M AT I O N INTRODUCTION Please read and understand the instructions in this manual carefully and thoroughly before attempting to operate this device. These instructions contain important safety and use information. UNPACKING Every device has been thoroughly tested and has been shipped in perfect operating condition.
(730 days). 2. For warranty service, send the product only to the Obsidian Control Systems service center. All shipping charges must be pre-paid. If the requested repairs or service (including parts replacement) are within the terms of this warranty, Obsidian Control Systems will pay return shipping charges only to a designated point within the United States.
This device is a sophisticated piece of electronic equipment. To guarantee a smooth operation, it is important to follow all instructions and guidelines in this manual. OBSIDIAN CONTROL SYSTEMS is not responsible for injury and/or damages resulting from the misuse of this device due to the disregard of the information printed in this manual. Only the original included parts and/or accessories for this device should be used.
N X D M X NX DMX is a USB powered 2 port DMX Node. As a member of the innovative ONXY platform from Obsidian Control Systems, the NX DMX provides instant access to DMX Inputs and Outputs, as well as RDM communication.
P C S Y S T E M R E Q U I R E M E N T S F O R N X D M X The NX DMX was designed to operate with an external PC. Although it can be used with any PC system, the ONYX controller software was designed around a touch screen interface, and without one, will be more difficult to use.
S E T U P The NX DMX draws its power from the connected computer via USB. If you use a USB hub, it must be powered. The host PC will fail to recognize a NX DMX device that is connected via an unpowered USB hub.
2x DMX / RDM Universe In/Out 5-pin locking XLR connectors are located on the back. Note that the NX DMX can draw a maximum of 300mA. If using a USB hub between the NX DMX and the host computer, make sure that the...
M A I N T E N A N C E The Obsidian Control Systems NX DMX is designed as a rugged, roadworthy device. The only required service is occasional cleaning. For other service related concerns, please contact your Obsidian Control Systems dealer, or visit www.obsidiancontrol.com .