Apollo VP200 Programming Manual page 17

VP200
Alert Tone Type
Select one of the Alert Tone type. The options has Standard, Continuous, User
defines.
Alert Patten
Enter in the tones A; B; C; D in the sequence in which you would like them to be
heard. A minus sign "-" creates a short pause. See the "Alert Tonality" for tones A; B;
C; D.
Alert Time
Select either standard (STD) or alert cycle duration variable (FIXED) in seconds.
STD = Alert cycle controlled by the transmitted tone duration. FIXED = a fixed time
entered by the user. (Note: A message may be missed if the alert duration is too
long.)
Priority Alert
If select this check box, the vibrate page alerts are replaced by tone alert for call 1
only.
PAGER PROGRAMMING SOFTWARE
March 12, 2007
VP200 Programming
15