Table of Contents
Advertisement
Assembly guide
1.
Assemble 4 X corner gussets
with 2 M8 screws and 2 M8 T-Nuts.
Screw in the T-Nuts no more than a turn.
Make sure to respect the shown orientation
of the t-nuts for trouble-free assembly.
2.
Slide the gussets on either side of the 1.5" x 10" extrusion.
Tighten the screws no more than hand tight. Repeat for both 10" extrusions.
2X
3.
Slide the assembled extrusions through the 1.5" X 40" extrusion as shown.
3
Advertisement
Table of Contents
Need help?
Do you have a question about the Advanced integrated triple monitor stand and is the answer not in the manual?