Table of Contents
Advertisement
2.
Remove the endcaps at the top of the up-posts on the chassis.
3.
Slide down the integrated mount with the t-nuts through the forwardmost and
rearmost slots on the up-post. If it doesn't fit nicely, loosen the screws from the
advanced arm to a 10" extrusion of the monitor mount. Start with the mount
flush to the top and tighten snug, but gear in mind it will have to be loosened for
adjustments later.
8
Advertisement
Table of Contents
Need help?
Do you have a question about the Advanced integrated triple monitor stand and is the answer not in the manual?