Table of Contents
Advertisement
4.
Fasten the VESA plate to your screen using your screen's included M4 screws. If
the mount cannot fit flush or causes interference with the display's cables, use
the included standoffs to space out the mount. Repeat for all screens.
Do not use the standoffs as screws.
5.
Place 2X M8 t-nuts on top of the 40" extrusion of the monitor stand and 2 per
24" extrusion. Follow the trick on the "T-nut install tip" page for some help!
9
Advertisement
Table of Contents
Need help?
Do you have a question about the Advanced integrated triple monitor stand and is the answer not in the manual?