D-Link VDI-624 Owner's Manual page 18

Using the Configuration Menu (continued)
DHCP stands for Dynamic Host Control Protocol. The VDI-624 has a built-in DHCP
server. The DHCP Server will automatically assign an IP address to the computers on
the LAN/private network. Be sure to set your computers to be DHCP clients by setting
their TCP/IP settings to "Obtain an IP Address Automatically." When you turn your
computers on, they will automatically load the proper TCP/IP settings provided by the
VDI-624. The DHCP Server will automatically allocate an unused IP address from the IP
address pool to the requesting computer. You must specify the starting and ending
address of the IP address pool.
DHCP Server-
Starting
IP Address-
Ending
IP Address-
Lease Time-
Home > DHCP
DI-754
Select Enabled or Disabled. The default setting is Enabled.
The starting IP address for the DHCP server's IP assignment
The ending IP address for the DHCP server's IP assignment
The length of time for the IP lease. Enter the Lease time. The
default setting is one hour
18