Using the Configuration Menu (continued)
Please be sure to
remove any
existing
PPPoE client
software
installed on your
computers.
Choose PPPoE (Point
to Point Protocol over
Ethernet) if your ISP
uses a PPPoE con-
nection. Your ISP will
provide you with a
username and pass-
word. Select Dynamic
PPPoE to obtain an IP
address automatically
for your PPPoE con-
nection. Select Static
PPPoE to use a static
IP address for your
PPPoE connection.
PPPoE-
User Name-
Retype Password-
Service Name-
IP Address-
Primary DNS
Address-
Secondary DNS
Address-
Home > WAN > PPPoE
Choose this option if your Service Provider uses PPPoE.
Dynamic PPPoE-
receive an IP Address automatically from your ISP.
Static
PPPoE-you have an assigned (static) IP Address.
Your PPPoE username provided by your Service Provider.
Re-enter the PPPoE password
Enter the Service Name provided by your Service Provider
(optional).
This option is only available for Static PPPoE. Enter the static IP
Address for the PPPoE connection.
Primary DNS IP address provided by our ISP
This option is only available for Static PPPoE. Enter the static IP
Address for the PPPoE connection.
(Continued on the next page)
16