D-Link VDI-624 Owner's Manual page 69

Frequently Asked Questions (continued)
Why can´t I access the web based configuration? (continued)
Ste Step 4 Ste Ste Ste p 4 p 4 (continued) p 4 p 4
Check your IP Address. Your computer must have an IP
Address in the same range of the device you are attempting to configure. Most D-Link
devices use the 192.168.0.X range.
Make sure you take note of your computer´s Default Gateway IP Address. The Default
Gateway is the IP Address of the D-Link router. By default, it should be 192.168.0.1.
How can I assign a Static IP Address in Windows XP?
Step 1
Click on Start > Control Panel > Network and Internet Connections >
Network connections.
Step 2 See Step 2
How can I assign a Static IP Address in Windows 2000?
Step 1 Right-click on My Network
Places and select Properties.
Step 2 Right-click on the Local
Area Connection which represents
your network card and select
Properties.
Highlight Internet Protocol (TCP/
IP) and click Properties.
for Windows 2000 and continue from there.
69