Related Manuals for GVision POE32MD-AU-400G
Summary of Contents for GVision POE32MD-AU-400G
- Page 1 WWW.GVISION-USA.COM POE32MD-AU-400G USER’S MANUAL POWER OF ETHERNET MONITOR GVISION USA, INC 30398 Esperanza, Rancho Santa Margarita CA 92688 / 949.586.3338 / info@gvision-usa.com...
- Page 2 CAUTION: Please use the power cord provided with this display in accordance with the table below. If a power cord is not supplied with this equipment, please contact GVISION. For all other cases, please use the power cord with the plug style that matches the power socket where the monitor is located.
- Page 3 Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power 30398 Esperanza, Rancho Santa Margarita CA 92688 / Tel. 949-586-3338 / Fax. 949-272-4594 / Email. info@gvision-usa.com ...
-
Page 4: Table Of Contents
OSD Setup Under VGA Input Mode……………………………………………………………………………….13 Setup Under SD/ USB Input Mode……………………………………………………………......16 Care & Cleaning………………………………………………………………………………………………………16 10. Mounting Monitor on Wall…………………………………………………………………………………………..16 11. Specifications………………………………………………………………………………........17 12. Dimensions……………………………………………………………………………………………………………..18 30398 Esperanza, Rancho Santa Margarita CA 92688 / Tel. 949-586-3338 / Fax. 949-272-4594 / Email. info@gvision-usa.com ... -
Page 5: Accessories
BNC Out acts as a loop out of the Input signal from BNC In. Connect device with a VGA output 15 pin D-sub cable Power input: AC 110V ~ 240V, 50/60Hz 30398 Esperanza, Rancho Santa Margarita CA 92688 / Tel. 949-586-3338 / Fax. 949-272-4594 / Email. info@gvision-usa.com ... -
Page 6: Control & Functions
Press SOURCE button to enter the sub-menu，then press ＋／－button correspondingly to change the setting When the setting is done, press MENU button to return to the previous menu or exit 30398 Esperanza, Rancho Santa Margarita CA 92688 / Tel. 949-586-3338 / Fax. 949-272-4594 / Email. info@gvision-usa.com ... -
Page 7: Remote Control
Source Open Source Menu ► Volume Up / Select Right Exit Exit ►II Play / Pause Confirm Selection ■ Exit / Stop 30398 Esperanza, Rancho Santa Margarita CA 92688 / Tel. 949-586-3338 / Fax. 949-272-4594 / Email. info@gvision-usa.com ... -
Page 8: Input Source
PVM Image mode>Motion. The PVM can also auto switch between different channel based on time, pls refer to the Image Mode setting>Switch 30398 Esperanza, Rancho Santa Margarita CA 92688 / Tel. 949-586-3338 / Fax. 949-272-4594 / Email. info@gvision-usa.com ... -
Page 9: Osd Setup Under Av/ Hdmi Input Mode
Press the “< or >“, button to select five kinds of settings (Low, Middle, Noise Reduction High, Off and Default), then press “Menu” button to exit. 30398 Esperanza, Rancho Santa Margarita CA 92688 / Tel. 949-586-3338 / Fax. 949-272-4594 / Email. info@gvision-usa.com ... - Page 10 Press “< or >” button to select ”On or Off”, Then , press “Menu” button Mute to exit. 30398 Esperanza, Rancho Santa Margarita CA 92688 / Tel. 949-586-3338 / Fax. 949-272-4594 / Email. info@gvision-usa.com ...
- Page 11 Press “< or >” button to set backlight. You have three sections: “ High, Backlight “Menu” button to exit. Middle and Low”. Finally, press 30398 Esperanza, Rancho Santa Margarita CA 92688 / Tel. 949-586-3338 / Fax. 949-272-4594 / Email. info@gvision-usa.com ...
- Page 12 Press “< or >” button to set the size of horizontal/ Vertical over-scan. H/V-Size Finally, press “Menu” button to exit. 30398 Esperanza, Rancho Santa Margarita CA 92688 / Tel. 949-586-3338 / Fax. 949-272-4594 / Email. info@gvision-usa.com ...
-
Page 13: Osd Setup Under Vga Input Mode
“<or>“ button to select “ 4:3 or Full”. Finally, press “Menu” button to exit Noise Reduction N/A. 30398 Esperanza, Rancho Santa Margarita CA 92688 / Tel. 949-586-3338 / Fax. 949-272-4594 / Email. info@gvision-usa.com ... - Page 14 Finally, press “Menu” button to exit Press “< or >” button to select ”On or Off”, Then , press “Menu” button Mute to exit. 30398 Esperanza, Rancho Santa Margarita CA 92688 / Tel. 949-586-3338 / Fax. 949-272-4594 / Email. info@gvision-usa.com ...
- Page 15 Press “< or >” button to set backlight. You have three sections: “ High, Backlight “Menu” button to exit. Middle and Low”. Finally, press 30398 Esperanza, Rancho Santa Margarita CA 92688 / Tel. 949-586-3338 / Fax. 949-272-4594 / Email. info@gvision-usa.com ...
-
Page 16: Setup Under Sd/ Usb Input Mode
(At least allow 5 to 10lbs extra). Use the VESA hole to mount the screw with at least 8mm length screw. 30398 Esperanza, Rancho Santa Margarita CA 92688 / Tel. 949-586-3338 / Fax. 949-272-4594 / Email. info@gvision-usa.com ... -
Page 17: Specifications
100 x 100 / 200 x 200 / 400 x 200 COMPLIANT Certification CE/FCC Specifications subject to change without any notice 30398 Esperanza, Rancho Santa Margarita CA 92688 / Tel. 949-586-3338 / Fax. 949-272-4594 / Email. info@gvision-usa.com ... -
Page 18: Dimensions
WWW.GVISION-USA.COM Dimensions 30398 Esperanza, Rancho Santa Margarita CA 92688 / Tel. 949-586-3338 / Fax. 949-272-4594 / Email. info@gvision-usa.com ...
Need help?
Do you have a question about the POE32MD-AU-400G and is the answer not in the manual?
Questions and answers