Web Configuration
Help
Fig. 5.8
Click on Help in the menu to see an explanation of the items in the
Configuration menu.
About
Fig. 5.9
Click on About in the menu to see the full name of the DWL-810.
6.
Installation
After you have configured the DWL-810, or if you are using Ad-Hoc mode,
you are ready to connect it to a network device to achieve wireless
transmission.
1. Connect one end of a Straight-Through Ethernet Cat5 cable to the
Ethernet port on the network device, and connect the other end of the
cable to the Ethernet port on the DWL-810.
2. Turn on the power of the network device.
19