D-Link DWL-810 Owner's Manual page 16

Web Configuration
Shared Key Authentication: By default, this is not selected. If you
would like to include a WEP check before allowing connection on the
network, select this item. If it remains unselected, only the SSID will be
checked before authorizing connection.
Click Apply to update the settings. Click Cancel to discard any changes
you have made. Changes will only take effect after you restart the DWL-810.
To restart, click on Admin in the system tool bar. Click Reboot in the Admin
window.
IP Address
Click on IP
Address in the
menu. The
default settings
are displayed.
To change the
settings, input
information into
the following
fields:
Static: Select
Fig. 5.5
Static (recommended) to assign the IP Address, the Subnet Mask and the
Gateway Address of the DWL-810.
DHCP: Select DHCP if a DHCP-capable router on the network will assign
an IP Address to the DWL-810. (This is not recommended because a
DHCP-assigned IP Address will change frequently, making the
DWL-810 impossible to configure.)
16