Download
Share
Print this page
iDataLink Maestro SR Install Manual
  1. Manuals
  2. Brands
  3. iDataLink Manuals
  4. Automobile Accessories
  5. Maestro SR
  6. Install manual

iDataLink Maestro SR Install Manual

2006-2013 audi a3 with symphony plus or factory navigation
Hide thumbs Also See for Maestro SR:

Advertisement

Quick Links

Download this manual
SELECT VEHICLE
PRINT PAGES NEEDED
HOW TO USE THIS INSTALL GUIDE
1
Open the Bookmarks menu and find your vehicle OR scroll
down until you find the install guide for your vehicle.
2
Print only the pages for your vehicle using the advanced
options in the Print menu.
3
Install your Maestro SR according to the guide for your vehicle.
Pressing the printer icon or "quick printing" this document will print
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certifed technician. Logos and trademarks used here in
are the properties of their respective owners.
WARNING
all of the guides in this compilation.

Advertisement

loading
Need help?

Need help?

Do you have a question about the Maestro SR and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for iDataLink Maestro SR

Summary of Contents for iDataLink Maestro SR

  • Page 1 Print only the pages for your vehicle using the advanced options in the Print menu. Install your Maestro SR according to the guide for your vehicle. WARNING Pressing the printer icon or “quick printing” this document will print all of the guides in this compilation.

  • Page 2: Install Guide

    PRODUCTS REQUIRED PROGRAMMED FIRMWARE: AU1-SR-DS iDatalink Maestro SR Radio Replacement Interface iDatalink Maestro SR-AU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

  • Page 3: Need Help

    Audi A3 with Symphony pluS or fActory nAvigAtion 2006-2013 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro SR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.

  • Page 4: Installation Instructions

    STEP 2 • Plug the harnesses into the aftermarket radio. • Plug the Data cable to the iDatalink port of the aftermarket radio. Note: On Pioneer radio, ensure that there is nothing plugged into the W/R port.

  • Page 5: Wiring Diagram

    User confgurable output - set up during module programming if desired. POC2 - POC2 - Low current negative (-350mA) polarity output used to trigger a relay. STEP 4 MAESTRO SR MODULE NOT REQUIRED STEERING WHEEL CONTROL CABLE Automotive Data Solutions Inc. © 2024 AU1-SR-DS-(SR-AU1)-EN maestro.idatalink.com...

  • Page 6: Radio Wire Reference Chart

    Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2024 AU1-SR-DS-(SR-AU1)-EN maestro.idatalink.com...

  • Page 7: Module Diagnostics

    Problem detected. Consult troubleshooting table. • 1 GREEN fash After radio boots up : Normal operation. • 3 GREEN fashes Bluetooth is activated. Turns off after one minute: Normal operation. • • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 AU1-SR-DS-(SR-AU1)-EN maestro.idatalink.com...

  • Page 8: Troubleshooting Table

    The light on the Maestro is blinking RED TWICE and the radio IS turning on. Ensure the 4-pin data cable is connected between the radio and the SR, and that it is plugged into the black port on the Maestro SR. The red and blue ports on the SR should be empty.
  • Page 9 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: AU1-SR-DS iDatalink Maestro SR Radio Replacement Interface iDatalink Maestro SR-AU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
  • Page 10 Audi A4 with fActory nAvigAtion 2005-2008 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro SR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
  • Page 11 STEP 2 • Plug the harnesses into the aftermarket radio. • Plug the Data cable to the iDatalink port of the aftermarket radio. Note: On Pioneer radio, ensure that there is nothing plugged into the W/R port.
  • Page 12 User confgurable output - set up during module programming if desired. POC2 - POC2 - Low current negative (-350mA) polarity output used to trigger a relay. STEP 4 MAESTRO SR MODULE NOT REQUIRED STEERING WHEEL CONTROL CABLE Automotive Data Solutions Inc. © 2024 AU1-SR-DS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 13 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2024 AU1-SR-DS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 14 Problem detected. Consult troubleshooting table. • 1 GREEN fash After radio boots up : Normal operation. • 3 GREEN fashes Bluetooth is activated. Turns off after one minute: Normal operation. • • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 AU1-SR-DS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 15 The light on the Maestro is blinking RED TWICE and the radio IS turning on. Ensure the 4-pin data cable is connected between the radio and the SR, and that it is plugged into the black port on the Maestro SR. The red and blue ports on the SR should be empty.
  • Page 16 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: AU1-SR-DS iDatalink Maestro SR Radio Replacement Interface iDatalink Maestro SR-AU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
  • Page 17 Audi A4 without fActory nAvigAtion 2007-2008 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro SR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
  • Page 18 STEP 2 • Plug the harnesses into the aftermarket radio. • Plug the Data cable to the iDatalink port of the aftermarket radio. Note: On Pioneer radio, ensure that there is nothing plugged into the W/R port.
  • Page 19 User confgurable output - set up during module programming if desired. POC2 - POC2 - Low current negative (-350mA) polarity output used to trigger a relay. STEP 4 MAESTRO SR MODULE NOT REQUIRED STEERING WHEEL CONTROL CABLE Automotive Data Solutions Inc. © 2024 AU1-SR-DS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 20 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2024 AU1-SR-DS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 21 Problem detected. Consult troubleshooting table. • 1 GREEN fash After radio boots up : Normal operation. • 3 GREEN fashes Bluetooth is activated. Turns off after one minute: Normal operation. • • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 AU1-SR-DS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 22 The light on the Maestro is blinking RED TWICE and the radio IS turning on. Ensure the 4-pin data cable is connected between the radio and the SR, and that it is plugged into the black port on the Maestro SR. The red and blue ports on the SR should be empty.
  • Page 23 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: AU1-SR-DS iDatalink Maestro SR Radio Replacement Interface iDatalink Maestro SR-AU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
  • Page 24 AUDI RS4 WITH SYMPHONY PLUS 2006 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro SR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
  • Page 25 STEP 2 • Plug the harnesses into the aftermarket radio. • Plug the Data cable to the iDatalink port of the aftermarket radio. Note: On Pioneer radio, ensure that there is nothing plugged into the W/R port.
  • Page 26 User confgurable output - set up during module programming if desired. POC2 - POC2 - Low current negative (-350mA) polarity output used to trigger a relay. STEP 4 MAESTRO SR MODULE NOT REQUIRED STEERING WHEEL CONTROL CABLE Automotive Data Solutions Inc. © 2024 AU1-SR-DS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 27 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2024 AU1-SR-DS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 28 Problem detected. Consult troubleshooting table. • 1 GREEN fash After radio boots up : Normal operation. • 3 GREEN fashes Bluetooth is activated. Turns off after one minute: Normal operation. • • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 AU1-SR-DS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 29 The light on the Maestro is blinking RED TWICE and the radio IS turning on. Ensure the 4-pin data cable is connected between the radio and the SR, and that it is plugged into the black port on the Maestro SR. The red and blue ports on the SR should be empty.
  • Page 30 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: AU1-SR-DS iDatalink Maestro SR Radio Replacement Interface iDatalink Maestro SR-AU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
  • Page 31 Audi RS4 with fActoRy nAvigAtion 2005-2008 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro SR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
  • Page 32 STEP 2 • Plug the harnesses into the aftermarket radio. • Plug the Data cable to the iDatalink port of the aftermarket radio. Note: On Pioneer radio, ensure that there is nothing plugged into the W/R port.
  • Page 33 User confgurable output - set up during module programming if desired. POC2 - POC2 - Low current negative (-350mA) polarity output used to trigger a relay. STEP 4 MAESTRO SR MODULE NOT REQUIRED STEERING WHEEL CONTROL CABLE Automotive Data Solutions Inc. © 2024 AU1-SR-DS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 34 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2024 AU1-SR-DS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 35 Problem detected. Consult troubleshooting table. • 1 GREEN fash After radio boots up : Normal operation. • 3 GREEN fashes Bluetooth is activated. Turns off after one minute: Normal operation. • • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 AU1-SR-DS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 36 The light on the Maestro is blinking RED TWICE and the radio IS turning on. Ensure the 4-pin data cable is connected between the radio and the SR, and that it is plugged into the black port on the Maestro SR. The red and blue ports on the SR should be empty.
  • Page 37 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: AU1-SR-DS iDatalink Maestro SR Radio Replacement Interface iDatalink Maestro SR-AU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
  • Page 38 Audi RS4 without fActoRy nAvigAtion 2007-2008 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro SR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
  • Page 39 STEP 2 • Plug the harnesses into the aftermarket radio. • Plug the Data cable to the iDatalink port of the aftermarket radio. Note: On Pioneer radio, ensure that there is nothing plugged into the W/R port.
  • Page 40 User confgurable output - set up during module programming if desired. POC2 - POC2 - Low current negative (-350mA) polarity output used to trigger a relay. STEP 4 MAESTRO SR MODULE NOT REQUIRED STEERING WHEEL CONTROL CABLE Automotive Data Solutions Inc. © 2024 AU1-SR-DS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 41 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2024 AU1-SR-DS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 42 Problem detected. Consult troubleshooting table. • 1 GREEN fash After radio boots up : Normal operation. • 3 GREEN fashes Bluetooth is activated. Turns off after one minute: Normal operation. • • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 AU1-SR-DS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 43 The light on the Maestro is blinking RED TWICE and the radio IS turning on. Ensure the 4-pin data cable is connected between the radio and the SR, and that it is plugged into the black port on the Maestro SR. The red and blue ports on the SR should be empty.
  • Page 44 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: AU1-SR-DS iDatalink Maestro SR Radio Replacement Interface iDatalink Maestro SR-AU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
  • Page 45 AUDI S4 WITH SYMPHONY PLUS 2006 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro SR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
  • Page 46 STEP 2 • Plug the harnesses into the aftermarket radio. • Plug the Data cable to the iDatalink port of the aftermarket radio. Note: On Pioneer radio, ensure that there is nothing plugged into the W/R port.
  • Page 47 User confgurable output - set up during module programming if desired. POC2 - POC2 - Low current negative (-350mA) polarity output used to trigger a relay. STEP 4 MAESTRO SR MODULE NOT REQUIRED STEERING WHEEL CONTROL CABLE Automotive Data Solutions Inc. © 2024 AU1-SR-DS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 48 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2024 AU1-SR-DS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 49 Problem detected. Consult troubleshooting table. • 1 GREEN fash After radio boots up : Normal operation. • 3 GREEN fashes Bluetooth is activated. Turns off after one minute: Normal operation. • • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 AU1-SR-DS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 50 The light on the Maestro is blinking RED TWICE and the radio IS turning on. Ensure the 4-pin data cable is connected between the radio and the SR, and that it is plugged into the black port on the Maestro SR. The red and blue ports on the SR should be empty.
  • Page 51 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: AU1-SR-DS iDatalink Maestro SR Radio Replacement Interface iDatalink Maestro SR-AU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
  • Page 52 Audi S4 with fActory nAvigAtion 2005-2008 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro SR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
  • Page 53 STEP 2 • Plug the harnesses into the aftermarket radio. • Plug the Data cable to the iDatalink port of the aftermarket radio. Note: On Pioneer radio, ensure that there is nothing plugged into the W/R port.
  • Page 54 User confgurable output - set up during module programming if desired. POC2 - POC2 - Low current negative (-350mA) polarity output used to trigger a relay. STEP 4 MAESTRO SR MODULE NOT REQUIRED STEERING WHEEL CONTROL CABLE Automotive Data Solutions Inc. © 2024 AU1-SR-DS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 55 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2024 AU1-SR-DS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 56 Problem detected. Consult troubleshooting table. • 1 GREEN fash After radio boots up : Normal operation. • 3 GREEN fashes Bluetooth is activated. Turns off after one minute: Normal operation. • • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 AU1-SR-DS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 57 The light on the Maestro is blinking RED TWICE and the radio IS turning on. Ensure the 4-pin data cable is connected between the radio and the SR, and that it is plugged into the black port on the Maestro SR. The red and blue ports on the SR should be empty.
  • Page 58 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: AU1-SR-DS iDatalink Maestro SR Radio Replacement Interface iDatalink Maestro SR-AU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
  • Page 59 Audi S4 without fActory nAvigAtion 2007-2008 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro SR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
  • Page 60 STEP 2 • Plug the harnesses into the aftermarket radio. • Plug the Data cable to the iDatalink port of the aftermarket radio. Note: On Pioneer radio, ensure that there is nothing plugged into the W/R port.
  • Page 61 User confgurable output - set up during module programming if desired. POC2 - POC2 - Low current negative (-350mA) polarity output used to trigger a relay. STEP 4 MAESTRO SR MODULE NOT REQUIRED STEERING WHEEL CONTROL CABLE Automotive Data Solutions Inc. © 2024 AU1-SR-DS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 62 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2024 AU1-SR-DS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 63 Problem detected. Consult troubleshooting table. • 1 GREEN fash After radio boots up : Normal operation. • 3 GREEN fashes Bluetooth is activated. Turns off after one minute: Normal operation. • • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 AU1-SR-DS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 64 The light on the Maestro is blinking RED TWICE and the radio IS turning on. Ensure the 4-pin data cable is connected between the radio and the SR, and that it is plugged into the black port on the Maestro SR. The red and blue ports on the SR should be empty.
  • Page 65 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: AU1-SR-DS iDatalink Maestro SR Radio Replacement Interface iDatalink Maestro SR-AU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
  • Page 66 Audi TT 2007-2015 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro SR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
  • Page 67 STEP 2 • Plug the harnesses into the aftermarket radio. • Plug the Data cable to the iDatalink port of the aftermarket radio. Note: On Pioneer radio, ensure that there is nothing plugged into the W/R port.
  • Page 68 User confgurable output - set up during module programming if desired. POC2 - POC2 - Low current negative (-350mA) polarity output used to trigger a relay. STEP 4 MAESTRO SR MODULE NOT REQUIRED STEERING WHEEL CONTROL CABLE Automotive Data Solutions Inc. © 2024 AU1-SR-DS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 69 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2024 AU1-SR-DS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 70 Problem detected. Consult troubleshooting table. • 1 GREEN fash After radio boots up : Normal operation. • 3 GREEN fashes Bluetooth is activated. Turns off after one minute: Normal operation. • • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 AU1-SR-DS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 71 The light on the Maestro is blinking RED TWICE and the radio IS turning on. Ensure the 4-pin data cable is connected between the radio and the SR, and that it is plugged into the black port on the Maestro SR. The red and blue ports on the SR should be empty.
  • Page 72 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: AU1-SR-DS iDatalink Maestro SR Radio Replacement Interface iDatalink Maestro SR-AU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
  • Page 73 Audi TT-RS 2012-2015 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro SR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
  • Page 74 STEP 2 • Plug the harnesses into the aftermarket radio. • Plug the Data cable to the iDatalink port of the aftermarket radio. Note: On Pioneer radio, ensure that there is nothing plugged into the W/R port.
  • Page 75 User confgurable output - set up during module programming if desired. POC2 - POC2 - Low current negative (-350mA) polarity output used to trigger a relay. STEP 4 MAESTRO SR MODULE NOT REQUIRED STEERING WHEEL CONTROL CABLE Automotive Data Solutions Inc. © 2024 AU1-SR-DS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 76 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2024 AU1-SR-DS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 77 Problem detected. Consult troubleshooting table. • 1 GREEN fash After radio boots up : Normal operation. • 3 GREEN fashes Bluetooth is activated. Turns off after one minute: Normal operation. • • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 AU1-SR-DS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 78 The light on the Maestro is blinking RED TWICE and the radio IS turning on. Ensure the 4-pin data cable is connected between the radio and the SR, and that it is plugged into the black port on the Maestro SR. The red and blue ports on the SR should be empty.
  • Page 79 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: AU1-SR-DS iDatalink Maestro SR Radio Replacement Interface iDatalink Maestro SR-AU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
  • Page 80 Audi TT-S 2009-2015 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro SR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
  • Page 81 STEP 2 • Plug the harnesses into the aftermarket radio. • Plug the Data cable to the iDatalink port of the aftermarket radio. Note: On Pioneer radio, ensure that there is nothing plugged into the W/R port.
  • Page 82 User confgurable output - set up during module programming if desired. POC2 - POC2 - Low current negative (-350mA) polarity output used to trigger a relay. STEP 4 MAESTRO SR MODULE NOT REQUIRED STEERING WHEEL CONTROL CABLE Automotive Data Solutions Inc. © 2024 AU1-SR-DS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 83 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2024 AU1-SR-DS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 84 Problem detected. Consult troubleshooting table. • 1 GREEN fash After radio boots up : Normal operation. • 3 GREEN fashes Bluetooth is activated. Turns off after one minute: Normal operation. • • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 AU1-SR-DS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 85 The light on the Maestro is blinking RED TWICE and the radio IS turning on. Ensure the 4-pin data cable is connected between the radio and the SR, and that it is plugged into the black port on the Maestro SR. The red and blue ports on the SR should be empty.
  • Page 86 Print only the pages for your vehicle using the advanced options in the Print menu. Install your Maestro SR according to the guide for your vehicle. WARNING Pressing the printer icon or “quick printing” this document will print all of the guides in this compilation.
  • Page 87 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: AU1-SR-AS iDatalink Maestro SR Radio Replacement Interface iDatalink Maestro SR-AU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
  • Page 88 Audi A3 with ConCert rAdio without nAV 2006-2007 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro SR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
  • Page 89 STEP 3 • Connect the factory radio harness to the SR-AU1 T-harness. STEP 4 • Connect the SR-AU1 harness to the Maestro SR module. • Connect the steering wheel control cable. Test your installation. Automotive Data Solutions Inc. © 2024 AU1-SR-AS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 90 User confgurable output - set up during module programming if desired. POC2 - POC2 - Low current negative (-350mA) polarity output used to trigger a relay. STEP 4 MAESTRO SR MODULE NOT REQUIRED DATA CABLE Automotive Data Solutions Inc. © 2024 AU1-SR-AS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 91 Wire Description Refer to camera/ Green/Red E-Brake LtGreen LtGreen radio manual Refer to camera/ Reverse Light* Purple/White Purple/White Green/White radio manual Steering Wheel Controls (DATA) Blue/Yellow Blue/Yellow Steering Wheel Controls (DATA) Blue/Yellow Blue/Yellow Automotive Data Solutions Inc. © 2024 AU1-SR-AS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 92 Flash module using Weblink Desktop and log in. Do NOT use DEMO MODE. • 3 GREEN fashes Bluetooth is activated. Turns off after one minute: Normal operation. • • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 AU1-SR-AS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 93 If installing a modular radio and it is not turning on, ensure the screen is secured and any trim pieces on the radio have been installed fully. MAESTRO SR RESET PROCEDURE: Turn the key to the OFF position, then disconnect all connectors from the module.
  • Page 94 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: AU1-SR-AS iDatalink Maestro SR Radio Replacement Interface iDatalink Maestro SR-AU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
  • Page 95 Audi A4 with Symphony rAdio without nAV 2002-2006 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro SR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
  • Page 96 STEP 3 • Connect the factory radio harness to the SR-AU1 T-harness. STEP 4 • Connect the SR-AU1 harness to the Maestro SR module. • Connect the steering wheel control cable. Test your installation. Automotive Data Solutions Inc. © 2024 AU1-SR-AS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 97 User confgurable output - set up during module programming if desired. POC2 - POC2 - Low current negative (-350mA) polarity output used to trigger a relay. STEP 4 MAESTRO SR MODULE NOT REQUIRED DATA CABLE Automotive Data Solutions Inc. © 2024 AU1-SR-AS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 98 Wire Description Refer to camera/ Green/Red E-Brake LtGreen LtGreen radio manual Refer to camera/ Reverse Light* Purple/White Purple/White Green/White radio manual Steering Wheel Controls (DATA) Blue/Yellow Blue/Yellow Steering Wheel Controls (DATA) Blue/Yellow Blue/Yellow Automotive Data Solutions Inc. © 2024 AU1-SR-AS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 99 Flash module using Weblink Desktop and log in. Do NOT use DEMO MODE. • 3 GREEN fashes Bluetooth is activated. Turns off after one minute: Normal operation. • • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 AU1-SR-AS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 100 If installing a modular radio and it is not turning on, ensure the screen is secured and any trim pieces on the radio have been installed fully. MAESTRO SR RESET PROCEDURE: Turn the key to the OFF position, then disconnect all connectors from the module.
  • Page 101 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: AU1-SR-AS iDatalink Maestro SR Radio Replacement Interface iDatalink Maestro SR-AU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
  • Page 102 AUDI A6 2004 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro SR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
  • Page 103 STEP 3 • Connect the factory radio harness to the SR-AU1 T-harness. STEP 4 • Connect the SR-AU1 harness to the Maestro SR module. • Connect the steering wheel control cable. Test your installation. Automotive Data Solutions Inc. © 2024 AU1-SR-AS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 104 User confgurable output - set up during module programming if desired. POC2 - POC2 - Low current negative (-350mA) polarity output used to trigger a relay. STEP 4 MAESTRO SR MODULE NOT REQUIRED DATA CABLE Automotive Data Solutions Inc. © 2024 AU1-SR-AS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 105 Wire Description Refer to camera/ Green/Red E-Brake LtGreen LtGreen radio manual Refer to camera/ Reverse Light* Purple/White Purple/White Green/White radio manual Steering Wheel Controls (DATA) Blue/Yellow Blue/Yellow Steering Wheel Controls (DATA) Blue/Yellow Blue/Yellow Automotive Data Solutions Inc. © 2024 AU1-SR-AS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 106 Flash module using Weblink Desktop and log in. Do NOT use DEMO MODE. • 3 GREEN fashes Bluetooth is activated. Turns off after one minute: Normal operation. • • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 AU1-SR-AS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 107 If installing a modular radio and it is not turning on, ensure the screen is secured and any trim pieces on the radio have been installed fully. MAESTRO SR RESET PROCEDURE: Turn the key to the OFF position, then disconnect all connectors from the module.
  • Page 108 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: AU1-SR-AS iDatalink Maestro SR Radio Replacement Interface iDatalink Maestro SR-AU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
  • Page 109 Audi AllroAd 2004-2005 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro SR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
  • Page 110 STEP 3 • Connect the factory radio harness to the SR-AU1 T-harness. STEP 4 • Connect the SR-AU1 harness to the Maestro SR module. • Connect the steering wheel control cable. Test your installation. Automotive Data Solutions Inc. © 2024 AU1-SR-AS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 111 User confgurable output - set up during module programming if desired. POC2 - POC2 - Low current negative (-350mA) polarity output used to trigger a relay. STEP 4 MAESTRO SR MODULE NOT REQUIRED DATA CABLE Automotive Data Solutions Inc. © 2024 AU1-SR-AS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 112 Wire Description Refer to camera/ Green/Red E-Brake LtGreen LtGreen radio manual Refer to camera/ Reverse Light* Purple/White Purple/White Green/White radio manual Steering Wheel Controls (DATA) Blue/Yellow Blue/Yellow Steering Wheel Controls (DATA) Blue/Yellow Blue/Yellow Automotive Data Solutions Inc. © 2024 AU1-SR-AS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 113 Flash module using Weblink Desktop and log in. Do NOT use DEMO MODE. • 3 GREEN fashes Bluetooth is activated. Turns off after one minute: Normal operation. • • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 AU1-SR-AS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 114 If installing a modular radio and it is not turning on, ensure the screen is secured and any trim pieces on the radio have been installed fully. MAESTRO SR RESET PROCEDURE: Turn the key to the OFF position, then disconnect all connectors from the module.
  • Page 115 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: AU1-SR-AS iDatalink Maestro SR Radio Replacement Interface iDatalink Maestro SR-AU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
  • Page 116 Audi S4 with Symphony rAdio without nAV 2002-2006 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro SR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
  • Page 117 STEP 3 • Connect the factory radio harness to the SR-AU1 T-harness. STEP 4 • Connect the SR-AU1 harness to the Maestro SR module. • Connect the steering wheel control cable. Test your installation. Automotive Data Solutions Inc. © 2024 AU1-SR-AS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 118 User confgurable output - set up during module programming if desired. POC2 - POC2 - Low current negative (-350mA) polarity output used to trigger a relay. STEP 4 MAESTRO SR MODULE NOT REQUIRED DATA CABLE Automotive Data Solutions Inc. © 2024 AU1-SR-AS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 119 Wire Description Refer to camera/ Green/Red E-Brake LtGreen LtGreen radio manual Refer to camera/ Reverse Light* Purple/White Purple/White Green/White radio manual Steering Wheel Controls (DATA) Blue/Yellow Blue/Yellow Steering Wheel Controls (DATA) Blue/Yellow Blue/Yellow Automotive Data Solutions Inc. © 2024 AU1-SR-AS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 120 Flash module using Weblink Desktop and log in. Do NOT use DEMO MODE. • 3 GREEN fashes Bluetooth is activated. Turns off after one minute: Normal operation. • • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 AU1-SR-AS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 121 If installing a modular radio and it is not turning on, ensure the screen is secured and any trim pieces on the radio have been installed fully. MAESTRO SR RESET PROCEDURE: Turn the key to the OFF position, then disconnect all connectors from the module.
  • Page 122 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: AU1-SR-AS iDatalink Maestro SR Radio Replacement Interface iDatalink Maestro SR-AU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
  • Page 123 Audi TT 2002-2006 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro SR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
  • Page 124 STEP 3 • Connect the factory radio harness to the SR-AU1 T-harness. STEP 4 • Connect the SR-AU1 harness to the Maestro SR module. • Connect the steering wheel control cable. Test your installation. Automotive Data Solutions Inc. © 2024 AU1-SR-AS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 125 User confgurable output - set up during module programming if desired. POC2 - POC2 - Low current negative (-350mA) polarity output used to trigger a relay. STEP 4 MAESTRO SR MODULE NOT REQUIRED DATA CABLE Automotive Data Solutions Inc. © 2024 AU1-SR-AS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 126 Wire Description Refer to camera/ Green/Red E-Brake LtGreen LtGreen radio manual Refer to camera/ Reverse Light* Purple/White Purple/White Green/White radio manual Steering Wheel Controls (DATA) Blue/Yellow Blue/Yellow Steering Wheel Controls (DATA) Blue/Yellow Blue/Yellow Automotive Data Solutions Inc. © 2024 AU1-SR-AS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 127 Flash module using Weblink Desktop and log in. Do NOT use DEMO MODE. • 3 GREEN fashes Bluetooth is activated. Turns off after one minute: Normal operation. • • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 AU1-SR-AS-(SR-AU1)-EN maestro.idatalink.com...
  • Page 128 If installing a modular radio and it is not turning on, ensure the screen is secured and any trim pieces on the radio have been installed fully. MAESTRO SR RESET PROCEDURE: Turn the key to the OFF position, then disconnect all connectors from the module.

This manual is also suitable for:

Maestro sr-au1Ads-msrHrn-sr-au1