Hub Or Switch To Router Connection; Power On Router - D-Link DSL-510 User Manual

Hub or Switch to Router Connection

Connect the Router to an uplink port (MDI-II) on an Ethernet hub or switch with a straight-through cable as shown in the
diagram below:
If you wish to reserve the
uplink port on the switch or
hub for another device,
connect to any on the other
MDI-X ports (1x, 2x, etc.) with
a cross-wired cable or use
crossover adapter.

Power On Router

To power on the device:
1. Insert the AC Power Adapter cord into the power receptacle located on the back of the Router and plug the adapter into
a nearby power source.
2. You should see the Power LED indicator light up and remain lit.
DSL-510 ADSL Router User's Guide
4
DSL-510