Table of Contents
Advertisement
DSL-510 ADSL Router User's Guide
Home＞WAN＞Bridge Mode
Choose Bridge Mode if all WAN IP information is provided to you by your ISP. You will need to enter in the VPI, VCI and
select connection type provided to you by your ISP.
VPI: If instructed to change this, type in the VPI value for the initial connection.
VCI: If instructed to change this, type in the VCI value for the initial connection.
Connection Type: Change connection method and packet encapsulation technique as instructed by your ISP. The
available connection types are 1483 Bridge LLC, 1483 Bridge VC-Mux, form the pull-down menu. Default Connection
Type = 1483 Bridge LLC.
Virtual Circuit: Selection Enable or Disable.
ATM
Service Category: UBR and CBR are supported form the ATM.
Bandwidth: Bandwidth setting takes effect only when the CBR is selected. The maximum available bandwidth is from the
upstream data rate of ADSL status page.
45
Advertisement
Table of Contents
