Download Print this page

Elite ProAV Golf Portable Pro Series User Manual

Multi-sports/golf simulation impact screen

Advertisement

Quick Links

_____________________________________________________________________________________________________________________________ _____
Thank you for choosing the Golf Portable Pro projection screen! Please read through this user guide
before utilizing the screen. Correct usage and maintenance will ensure a long product life.
Care & Use Instructions
◆ Elite Screens highly recommends two people to assemble the Golf Portable Pro screen.
◆ Make sure to distinguish the front/back of the impact/projection screen when setting it up. The backside has
Velcro. Follow the instructions in the screen assembly section to assure the front side is set up properly.
◆ Be sure to use the screen only during a light breeze (up to wind speeds of 7 mph); it is not meant to withstand
heavy winds. *Elite ProAV is not responsible for damages due to negligence resulting from misuse under
weather conditions and will void your warranty.
◆ Dust, dirt and scratches on the projection surface will affect the picture quality, please take note of the points
below to prevent that from occurring:
1. Do not touch the projection surface with your hands.
2. Do not write or draw on the projection surface.
3. Do not point at the projection surface with your fingers or sharp objects; this will damage the screen
material.
4. Use a soft bristle brush or dry microfiber cloth to remove dust from the screen surface.
5. Do NOT use any solutions, chemical cleaning agents, alcohol, or abrasive to clean the screen surface.
6. When cleaning the projection surface, use a soft cloth dampened with warm water to remove any traces.
7. Do NOT rub or apply pressure when cleaning the surface.
8. Use a fabric steamer no higher than Polyester setting to remove any wrinkles or folds in the material.
◆ After using the screen, disassemble it and store it in the carrying bag provided.
◆ To avoid damage and injury, the screen should only be operated by adults.
Product Description
Design: The aluminum frame is designed to be light weight and easily operated making it easy to carry,
assemble and disassemble.
Screen Fabric: The screen fabric is attached to the rectangular frame and held in place by Velcro
strips, which ensure an evenly stretched and flat surface. The ImpactWhite®
durable and can be folded many times without causing damage or distortion to the surface.
Installation Tips and Precautions
We consider our impact screens a wearable item and the life of them will vary according to their use.
1. Make sure to allow proper distance for swing range to protect children, pets, ceilings, walls, windows, or any other
property.
2. Avoid using golf balls with scuffs or markings to maximize the life of your ImpactWhite® 350 screen. If possible,
use new golf balls.
3. Never place the screen over a window or under constant sun exposure. Solar radiation from direct sunlight destroys
the synthetic fibers of the screen.
Rev. 08052024JA (DZUG0183)
Golf Portable Pro Series
Multi-Sports/Golf Simulation Impact Screen
Visit
www.eliteproav.com
1
User's Guide – E/H Type
for latest updated version.
screen material is
350
www.eliteproav.com
V1.0

Advertisement

loading
Need help?

Need help?

Do you have a question about the Golf Portable Pro Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Elite ProAV Golf Portable Pro Series

  • Page 1 ◆ Be sure to use the screen only during a light breeze (up to wind speeds of 7 mph); it is not meant to withstand heavy winds. *Elite ProAV is not responsible for damages due to negligence resulting from misuse under weather conditions and will void your warranty.
  • Page 2 Hardware and Parts list A: Top Folding frame x 1 B: Bottom Folding frame x 1 C: Left Folding frame x 1 Right Folding frame x 1 E: M8 Knob screws x 8 F: Impact golf screen material x 1 G: Top Enclosure Cover x 1 H: Left Enclosure Cover x 1 I: Right Enclosure Cover x 1...
  • Page 3: Assembly Diagram

    Assembly diagram A: Top Folding Frame Protection Cover P. Padding G. Top Enclosure Cover E: M8 Knob Screws H: Left Enclosure Cover K: Velcro Strips F: Impact Golf Screen Material B: Bottom Folding Frame E: M8 Knob Screws I. Right Enclosure Cover C: Left Folding Frame J: Ball Bungees D: Right Folding Frame...
  • Page 4: Frame Assembly

    Frame assembly 1. Take the frames out of the carrying bag, unfold and place them on the protection sheet (L) as shown below. Align the frame’s screw holes to fasten them with the knob screws (E) Note: The button's direction here can help distinguish the position of the left/right frame.
  • Page 5 Impact Screen, Left/Right/Top Enclosure Cover Assembly 1. Please follow the instructions below to place the impact screen (F) with the backside facing up before assembly commences. Note: The impact screen has Velcro (soft fuzzy side) on Top edge. This is the backside of the impact screen. 2.
  • Page 6 1. Left (H) and Right (I) side enclosure cover assembly. Right enclosure cover (I) Left enclosure cover (H) 1. Prepare the enclosure covers 2. Aligned velcro the enclosure 3. Velcro the enclosure cover for attachment to the frame by cover to the inside of the small and impact material together identifying the front and back.
  • Page 7 3.Top enclosure cover (G) assembly. (A) Attach Left and Right sides Position the top enclosure cover so the black side faces in, and the silver side faces out. Align and velcro the enclosure cover to Stretch the enclosure cover to Pull the enclosure cover tightly the outer side of the small side frame reach the right side.
  • Page 8 2. Attach the Left/Right enclosure cover (H / I) to secure on the bottom of the frame legs. Snap the bottom of the enclosure Repeat the same procedure for cover to the press stud on the Left enclosure cover (H) the Right enclosure cover (I).
  • Page 9 Upper Frame Padding Installation ATTN: Start the installation on the inner left side of the enclosure as shown in the illustration. 1. Fasten the Protection Cover (O) between the 2. After the Protection Cover (O) has been fastened Left Enclosure Cover (H) and the Top insert a short Padding (P) on the left side and continue Enclosure Cover (G) with the Velcro strips.
  • Page 10 Impact screen surface tension and flatness adjustment Wrap tie six Velcro strips (K) on each vertical side frame evenly as instructed below to pull the impact screen material to tension it. Wrap one end of the velcro strip on the vertical Open the edge of frame with the soft fuzzy side facing in.
  • Page 11 Disassembly and repacking into the carrying bag Reverse the installation process to disassemble the Golf Portable Pro. Pack the items back into the carrying bag as shown in the layout diagram below. For local Elite ProAV contact or Technical Support, please visit www.eliteproav.com Rev. 08052024JA (DZUG0183)