Elite ProAV MT100XWH User Manual

Manual Tab-Tension Series
Tensioned Manual Pull Down Projector Screen
(Bead Chain Operated)
User's Guide
Thank you for choosing the Manual Tab-Tension Series projection screen!
Please be sure to read the precautions and operating instructions carefully
before operating the screen. Proper maintenance and handling will ensure a
longer life-span of the product.
WARNING!
Keep the bead chain out of the reach of small children. A child can
accidentally hook the bead chain around his/her neck and cause serious
injury or even death.
1. ALWAYS keep cords and bead chains out of children's reach.
2. MOVE cribs, playpens, beds, and any other furniture away from the
bead chain. Children can climb on furniture and be able to reach the chain.
3. INSTALL the chain tensioner as it serves as a safety device to keep the
bead chain from being able to be pulled away from the wall.
Note:
Wall screws included with this product are complementary and may not be adequate for all mounting
surfaces. Consult with a professional installer or hardware store for proper mounting screws and anchors.
Regardless of the mounting method, the screen should be securely supported so that the vibration or pulling
on the viewing surface will not cause the screen case to become loose or fall. The installer must ensure that
proper mounting hardware and the fasteners used are of adequate strength and suitable for the mounting
surface.
Rev.04/28/17 DR 1 www.eliteproav.com