Download Print this page

Elite ProAV Yard Master Electric Series User Manual

Outdoor movie electric/motorized projector screen

Advertisement

Quick Links

Yard Master Electric Series
Outdoor Movie Electric/Motorized Projector Screen
Thank you for choosing the Yard Master Electric projection screen! Please read through this user
guide before utilizing the screen. Correct usage and maintenance will ensure a long product life
Product Description:
The Yard Master Electric is an outdoor projector screen for wall and patio installations that brings
media room quality to your outdoor spaces. Its sleek aluminum casing beautifully accessorizes your
backyard, patio, pool deck or anywhere a gathering for evening movie time is appropriate.
Outdoor Projection Screen Disclaimer
Never leave your projection screen out and exposed to direct sunlight. Regardless of screen brand,
prolonged exposure to the sun's ultraviolet radiation degrades the chemical bonds causing the
material to eventually decompose. Photo degradation first causes the material to lose its theater-
grade reflective qualities. Eventually nature will completely destroy even synthetic materials. For
this reason, the Yard Master Electric has a retractable design that allows the material to be drawn up
into its protective casing to be shielded from solar radiation.
Care & Use Instructions
Dust, dirt and scratches on the projection surface will affect the picture quality, please take note of
the points below to prevent that from occurring:
1. Do not touch the projection surface with your hands
2. Do not write or draw on the projection surface
3. Do not use fingers or sharp objects to point on the projection surface; this will damage the
screen material.
4. Use a soft-damp cloth to clean the projection surface; do not use chemical cleaning agents
or alcohol.
5. Use clean water when dampening the cleaning cloth and do not rub against the material to
clean it.
To avoid damage and injury, the screen should only be operated by adults.
Rev. 12/6/18
User's Guide
1
eliteproav.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the Yard Master Electric Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Elite ProAV Yard Master Electric Series

  • Page 1 Yard Master Electric Series Outdoor Movie Electric/Motorized Projector Screen User’s Guide Thank you for choosing the Yard Master Electric projection screen! Please read through this user guide before utilizing the screen. Correct usage and maintenance will ensure a long product life...
  • Page 2 Important Safety & Warning Precautions Make sure to read this user’s guide and follow the procedures below. • Please retain this user’s guide for future reference. • To avoid damaging the unit, do not use with any unauthorized accessories not recommended by the manufacturer.
  • Page 3: Pre-Installation

    The installer must insure that the fasteners used are of adequate strength and suitable for the installation location. Hardware Parts List for Yard Master Electric Series A. Mounting Bracket B.
  • Page 4 3. Attach the screen to the Mounting Brackets (A) by inserting the top of the case to Fix Plate 1 and securing the back of the case to Fix Plate 2. Make sure the case slots are securely attached to the mounting brackets.
  • Page 5 3. Attach the screen to the Mounting Bracket (A) by inserting the top of the case to Fix Plate 1 and securing the back of the case to Fix Plate 2. Make sure the case slots are securely attached to the Mounting Bracket (A).
  • Page 6 Release Tab Pull bottom of case first away from wall/ceiling Control for Yard Master Electric Series RF Remote Control: The radio waves eliminate the need for a direct line of sight with a range of 100 feet. STOP...
  • Page 7 Magnetic bottom bracket Installation 1. After the screen is plugged in to a power outlet, press the DOWN button on the RF remote control (F).Install the magnetic bottom bracket (G) so that the weight bar sleeve cradles inside (see picture below). Note: The screen should deploy straight down and align with the magnetic bottom bracket (G).
  • Page 8 M8 x 35 Anchor M4x35 Screw Wall The magnetic bottom bracket 4. Drop the screen DOWN using the RF remote, see if the position of the magnetic bottom bracket (G) is correct or not. Reposition the magnetic bottom bracket if needed. How to ground the screen 1.