Sleep Operation - Haier HSU-24LEA03-T Operation Manual

Operation

Sleep Operation

Before going to bed, you can simply press the
SLEEP button and unit will operate in SLEEP
mode and bring you a sound sleep.
Use of SLEEP function
After the unit starts, set the operation status,
then press SLEEP button before which the
clock must be adjusted and time being set.
Operation Mode
1. In COOL,DRY mode
1 hours after SLEEP mode starts, temp. will
become 1 O C higher than temp. setting. After
another 1 hours, temp. rises by 1
The unit will run for further 6 hours then stops.
Temp. is higher than temp. setting so that room
temperature won't be too Iow for your sleep.
Remote Controller
Note
When TIMER ON function is set,the sleeping function
can't be set up.After the sleeping function is set up,if
user resets TIMER ON function,the sleeping function
will be cancelled; the machine will be in the state of
timing-on.
2. In HEAT mode
O C further.
1 hours after SLEEP mode starts, temp will
become 2
1 hours, temp decrease by 2
another 3 hours, temp. rises by 1
unit will run for further 3 hours then stops.
Temp. is lower than temp. setting so that room
3.
POWER/SOFT
4. In FAN mode
5.Set the wind speed change when sleeping
If the wind speed is high or middle before
setting for the sleep, set for lowing the wind
speed after sleeping. If it is low wind, no change.
Power Failure Resume Function
If the unit is started for the first time, the compressor
will not start running unless 3 minutes have elapsed.
When the power resumes after power failure, the
unit will run automatically,and 3 minutes later the
compressor starts running.
15
SLEEP operation starts
Approx.6hrs
Rises 1
1 hr
O
Rises 1
1 hr
Temp.setting
In COOL, DRY mode
C lower than temp. setting.After another
O
tempe rature won't be too high for your sleep.
Temp.setting
1 hr
Decreases 2
1 hr
Decreases 2
3 hrs
SLEEP
operation starts
In HEAT mode
In AUTO mode
The unit operates in corresponding sleep
mode adapted to the automatically selected
operation mode.
It has no SLEEP function.
SLEEP operation stops
O
C
C
Unit stop
C further. After more
O
C further. The
O
Unit stop
O C
C
O
3 hrs
O
Rises 1 C
SLEEP
operation stops