Olympus LS-100 User Manual page 99

File menu [File Menu]
5
[File Menu]
[Menu]
{
[Bounce]
6
Press the OK button.
• The bounce check window appears.
7
Press the + button to select [Start].
8
Press the OK button.
• The animation is displayed on the
screen, and the bounce process starts.
[When [Done] is displayed, bouncing
is finished.
• When the bounce process completes,
the new PCM format [44.1kHz/16bit]
file is saved in the project.
{
• When [Bounce] ( ☞ P.106) is set to the Fn
button, pressing the allocated button starts the
bounce process.
Caution
• [Bounce] does not function in the recorder
mode.
6
EN