Olympus LS-100 User Manual page 63

Creating a Multi-Track Project
9
Repeat steps 3 to 6 to
add more sound
sources to empty
tracks.
10
Bounce the tracks
5 Press the REC button to start recording.
• Listening to the playback, press the REC
button. The recording will be made on the
track specified in step 1 .
6 Press the STOP button to stop recording
and playback.
This recorder allows you to save up to 8 tracks
under 1 project. Once you run out of empty
tracks, create bounce files and assign them to
tracks.
You can bounce any of the files that are currently
assigned to tracks.
1 Press the preassigned Fn (Bounce) button.
• The option of bouncing files becomes
available once you set the "Track
Assignment" ( ☞ P.62).
• Be sure to assign the [Bounce] function to
the Fn button in advance ( ☞ P.106).
2 Press the + button to select [Start].
3 Press the OK button.
• An animation will appear on the display, and
bouncing starts.
• [Bounce] appears when the bouncing is
complete. It will be saved as a new PCM
format [44.1kHz/16bit] file under the same
project.
4
EN