Olympus LS-100 User Manual page 52

Erasing
▌
Important Notes on Erasing
• Once erased, files cannot be recovered. Check
carefully before erasing files.
• When you have an SD card inserted in the
recorder, make sure to check if your memory
selection is set to [Internal memory] or [SD
3
card] ( ☞ P.107).
• Locked or read-only files cannot be erased
( ☞ P.90).
• No more recordings can be made when
[Memory full] appears. Erase unnecessary files
before continuing to record.
• Files that the recorder does not recognize, as
well as folders containing such files, will not be
erased. To erase them, connect the recorder to
your computer.
• Check the remaining battery level beforehand in
order to avoid running out of the battery during
the process. Note that the erasing process may
take a few tens of seconds. Never perform the
following operations while erasing is in progress,
as doing so may damage your data:
1 Disconnect the AC adapter.
2 Remove the battery.
3 Remove the SD card while the recording
medium is set to [SD card].
EN