TV, smartphone, or other digital devices. Using a USB cable both for power and for data transfer to a set-top box, the platform- independent PC501 can translate settings from the 3rd-party interface to standard P5 commands for heating, lighting, or other room equipment. In turn,...
Enseo, Exceptional Innovation). Generally, it will be a video on demand (VoD) device with a dedicated USB port for communication with and power for the PC501. The vendor must develop the FastPack Serial Protocol for interaction with INNCOM devices as well as supporting FTDI Serial drivers for the USB connection.
PC501 Product Guide Radio Specifications The PC501 houses either a 0dB (P/N 02-9994) or 20dB (P/N 02-9894) radio, depending on the required application. Performance 02-9994 02-9894 RF Data Rate 250kbps Antenna Type Indoor Range 70ft 100ft Outdoor RF/Line-of-Sight 540ft 1000ft+...
PC501 Product Guide Power Consumption The PC501 has multiple types of transmission mediums such as a 1mW radio, 20mW radio, IR transmitter, and hardwired S5bus communications. Peak values are based on current consumption measured while transmitting each medium. Parameter Nominal...
(VAL: 234). This puts the thermostat into bind ready mode for the PC501. 4. Power up the PC501 (either by connecting it to a power source through the 3-pin S5 bus or by plugging in the USB connector to the 3rd-party box or the USB connector on a laptop) 5.
Honeywell makes no representations or warranties with respect to this document. In no event shall Honeywell be liable for technical or editorial omissions or mistakes in this document, nor shall it be liable for any damages, direct or incidental, arising out of or related to the use of this document. No part of this document may be reproduced in any form or by any means without prior written permission from Honeywell.
Need help?
Do you have a question about the PC501 and is the answer not in the manual?
Questions and answers