Home Accents Holiday LED ANIMATED FACELESS SCARECROW 22TK60285 Installation And Operating Instructions

led animated faceless scarecrow
1. BODY AND HEAD
2. METAL STAND
3. RIB CAGE
4. UPPER POLE AND
CONTROL BOX
5. LOWER POLE
6. CENTER POLE
7. LEFT ARM POLE
8. RIGHT ARM POLE
9. GROUND STAKE
10. 6V2A ADAPTER
1. Snap lock the LOWER POLE
into the METAL FRAME.
Match A to A
MOTION
SENSOR
5. Slide the wire from the RIB
CAGE through the hole in the
front of the fabric.
INSTALLATION AND OPERATING INSTRUCTIONS
KEEP ALL PLASTIC AND WIRE PARTS AWAY FROM CHILDREN
WARNING: DO NOT TURN ON THE PROP UNTIL FULLY ASSEMBLED. STAY CLEAR OF THE PROP WHILE OPERATING.
PARTS
1. 2.
ASSEMBLY
2. Snap lock the CENTER POLE
into the LOWER POLE.
Match B to B
6. Lift the burlap collar. Attach
the RIB CAGE to the hook and
loop located on the front of the
fabric. The MOTION SENSOR
should clear of fabric and any
other obstruction.
ESTIMATED ASSEMBLY TIME FIVE MINUTES.
3. 4.
3. Snap lock the UPPER POLE
AND CONTROL BOX into the
CENTER POLE.
Match C to C
7. Slide the RIGHT ARM POLE up
inside the sleeve. Open the front
of the coat and snap lock the
ARM POLE to the shoulder.
Match E to E
5. 6. 7. 8. 9.
4. Snap lock the BODY AND
HEAD onto the CENTER POLE.
Match D to D
8. Slide the LEFT ARM POLE up
inside the sleeve. Open the front
of the coat and snap lock the
ARM POLE to the shoulder.
Match F to F
™
10.