Press for 3 seconds Press for 5 seconds Beep Beep 5” Flashes Flashes 3” Select R1 Mesh on SWITCH OFF PHONE, GPS or TFT Press together for 3 sec. Beep Notification jingle Confirm (1 sec.) Flashes Note: to pair a 2nd device in mono audio, repeat this procedure using Vol -.
Page 3
Note: to pair a second intercom of another brand, follow the same procedure Beep using the Down button. Note: a maximum of 2 intercoms (Midland, OBI or other brand) can be paired, one on each button. A second pairing on the same button Confirm (1 sec.)
(see MESH, PARTICIPANTS MUST HAVE DIFFE- TABLE 1) RENT IDS AND ACTIVE MESH. TABLE 1 - IDS ASSIGNED TO THE VARIOUS GROUPS: R1 Mesh uses only the Dynamic repeat mode. GUESTS GROUP Mesh Dynamic Repeat Infinite ID 1...
Page 5
INTERCOM FEATURES TO OPEN/CLOSE INTERCOM MANUALLY TO OPEN/CLOSE UNIVERSAL INTERCOM Press 2 times to open or close Press 2 times the Universal Intercom Beep Beep Flashes Flashes Nota: to communicate with Rider 2 repeat the process by pressing the Up button. Note: to activate/deactivate the audio from a different brand device, use the voice call command (for some models it is necessary to send the voice call 2 times)
INTERCOM FEATURES PHONE FEATURES FUNCTION DESCRIPTION NOISE GATE (INTELLIGENT MICROPHONE POWER OFF) Play/Pause 3” Press together for 3 seconds Voice Assistant (Phone on Vol+ ) Voice Assistant (Phone on Vol- ) Voice announcement NOTE: All Phone features are accessible with 1 click VOICE ASSISTANT AGC ACTIVATION/DEACTIVATION (AUTOMATIC VOLUME ADJUSTMENT)
Page 7
Press for 3 sec. to reject a call Note: any button can be used. Press 1 time Voice announcement MUSIC Select Music app Note: You can only share music with a Midland Intercom. Press 1 time Play/Pause Press 1 time Next track Press 1 time Previous track...
Page 8
Frequency (GHz) Max power (mW) 2.402 - 2.480 For more info visit: https://support.midlandeurope.com/ Select a product and: Watch tutorial video - Download software Download Midland Connect from App Store or Google Play...
Need help?
Do you have a question about the R1 MESH and is the answer not in the manual?
Questions and answers