Page 3
Confirmation (1 sec.) Confirmation (1 sec.) Note: to pair a second device in mono audio, repeat the same procedure but press VOL-. MIDLAND INTERCOM PAIRING OTHER BRAND INTERCOM PAIRING (UNIVERSAL INTERCOM) Status: Settings (steady red led) Status: Settings (steady red led) 3”...
Page 4
3” 3” Blinking changes Note: the Conference allows the simultaneous communication amongs Midland units. Units must be paired in a “chain” configuration. Frequency (GHz) Max power (mW) Down Button of Unit 1 with Up Button of Unit 2 Down Button of Unit 2 with Up Button of Unit 3 2.402 - 2.480...
Flashes quickly Operating mode status Note: to communicate with Rider 2-3 repeat the procedure by pressing Up (Rider 2) / Down (Rider 3). Note: By pressing briefly Vol + and Vol - together, BTR1 Advanced communicates the selected operating mode.
Page 6
OPERATING MODES INTERCOM MODE OPEN/CLOSE UNIVERSAL INTERCOM ACTIVATE/DEACTIVATE VOX Status: Intercom mode Status: in all modes the intercom communication MUST be closed) Press once the button used for the Universal Intercom pairing Press for 7 seconds Beep Flashes Voice announcement 7”...
OPERATING MODES INTERCOM MODE PHONE MODE DESCRIZIONE FUNZIONI OPEN/CLOSE CONFERENCE Press once the buttons to activate: Status: Conference (Phone on Vol+) • Call Play/Pause • Answer • End Press once opens/closes • Next song Conference with the unit paired to Down button (Phone on Vol-) •...
Status: phone mode Status: all modes Status: radio mode Select Music App Select Music App Press once On/Mute Open Midland intercom (manually or by VOX) Press once station forward Press once Play/Pause 3” Press for 3 sec. memory forward Press once Next track Press once station backward 3”...
Need help?
Do you have a question about the BTR1 ADVANCED and is the answer not in the manual?
Questions and answers