Aiwa NSX-V70 Operating Instructions Manual page 22

1
TUNER
BAND
'8
2
0000
0000
000
b
PRESETTING STATIONS + EI
The unit can store a total of 32 preset stations. When a station
is stored, a preset number is assigned to the station. Use the
preset number to tune in to a preset station directly.
1
2
3
Press the TUNER/BAND button to select a band,
and press the M DOWN or Bt UP button to
select a station.
Press the II SET button to store the station.
A station is assigned a preset number from 1 in consecutive
order for each band.
DISPLAY
@ The frequency
@ The preset number
@ The preset numbers
The selected preset number' flashes,
Note that only the first 20 numbers are displayed, even if
stations 21 to 32 have been stored.
Repeat steps 1 and 2.
The next station will not be stored if a total of 32 preset stations
have already been stored for all the bands.
PRESET NUMBER TUNING + I=
Use the remote control to select the preset number directly.
1
2
Press the TUNER/BAND button to select a band.
Press the numeric buttons to select a preset
number.
Example:
To select preset number 25, press the +10, +10 and 5 buttons.
To select preset number 10, press the +10 and O buttons,
DISPLAY
@ Preset number
@ Frequency
Selecting a preset number on the main unit
Press the TUNEFVBAND button to select a band. Then, press
the 4> DIRECTION/PRESET button repeatedly.
Each time the button is pressed, the next highest number is
selected.
To clear a preset station
Select the preset number of the station to be cleared. Then, press
the Z CLEAR button, and press the II SET button within 4
seconds,
The preset numbers of all other stations in the band with higher
numbers are also decreased by one.
22