Advertisement

Quick Links

EN User Manual | Washing Machine
EFI61941B

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EFI61941B and is the answer not in the manual?

Questions and answers

Summary of Contents for Electrolux EFI61941B

  • Page 1 EN User Manual | Washing Machine EFI61941B...
  • Page 2: Table Of Contents

    Welcome to Electrolux! Thank you for choosing our appliance. Get usage advice, brochures, trouble shooter, service and repair information: www.electrolux.com/support Subject to change without notice. CONTENTS 1. SAFETY INFORMATION................2 2. SAFETY INSTRUCTIONS................4 3. PRODUCT DESCRIPTION................6 4. TECHNICAL DATA..................7 5.
  • Page 3 the use of the appliance in a safe way and understand the hazards involved. • Children between 3 and 8 years of age and persons with very extensive and complex disabilities shall be kept away from the appliance unless continuously supervised. •...
  • Page 4: Safety Instructions

    • If a tumble dryer is stacked on the top of the washing machine, make sure to use the correct stacking kit approved by ELECTROLUX (see more details in chapter "Accessories - Stacking kit"). 2. SAFETY INSTRUCTIONS 2.1 Installation...
  • Page 5 appliance. Contact the Authorised Service • When unpacking the appliance, It is Centre to ensure which accessories can possible to see water flowing from the be used. drain hose. This is due to the testing of the appliance with the use of water in the 2.2 Electrical connection factory.
  • Page 6: Product Description

    circuit boards, electronic displays, intended to be used in other applications pressure switches, thermostats and and are not suitable for household room sensors, software and firmware including illumination. reset software, door, door hinge and 2.6 Disposal seals, other seals, door locking assembly, plastic peripherals such as detergent dispensers.
  • Page 7: Technical Data

    Scan the QR code on the appliance to register your product and get the most out of it. • - Access your appliance details, documentation and articles on how to use the best features (User Manual also available at electrolux.com/manuals ) • - Get usage advice, troubleshooting, service and repair information (also available at electrolux.com/support )
  • Page 8 5.1 Unpacking WARNING! 1. Open the door. Remove all the items from It is possible to see water flowing the drum. from the drain hose. This is because the washing machine has been tested at the factory. 4. Remove the three transit bolts and pull out the plastic spacers.
  • Page 9 WARNING! Do not put cardboard, wood or equivalent materials below the appliance feet to adjust the level. 3/4” The inlet hose CAUTION! Make sure there is no damage to hoses 3/4” and there are no leaks from the couplings. Do not use an extension hose if the inlet hose is too short.
  • Page 10 Make sure that the plastic guide cannot The end of the drain hose must always move when the appliance drains and the be ventilated , i.e. the inner diameter of drain hose end is not immersed in the the drain pipe (min. 38 mm - min. 1.5") water.
  • Page 11: Accessories

    Connect the appliance to an earthed The power supply cable must be easily socket. accessible after installing the appliance. For any electrical work required to install this appliance, contact our Authorised Service Centre. The manufacturer does not accept any responsibility for damage or injury through failure to comply with the above safety precaution.
  • Page 12 programme duration in 30 seconds. The than necessary. Read the paragraph "The washing programme is tailored to the SensiCare load detection " for more laundry load and the type of fabric without details. consuming more time, energy and water 7.2 Control panel description Programme dial Temp.
  • Page 13: Dial And Buttons

    8. DIAL AND BUTTONS 8.1 Introduction The door stays locked and the drum turns regularly to reduce creasing. You must drain the water to unlock the door. If you touch the Start/Pause button, The options/functions are not available the appliance performs the spinning phase with all washing programmes.
  • Page 14: Programmes

    Touch Time Manager button to reduce the 8.7 Start/Pause programme duration according to your needs. The display shows the new programme Touch the button to start, pause the duration. appliance or interrupt a running programme. This option is not available for every 8.8 On/Off programme.
  • Page 15 Programme Reference Maxi‐ Programme description Default tempera‐ spin speed (Type of load and level of soiling) ture Spin speed load Temperature range (rpm) range 1400 rpm 9 kg All fabrics, except woollens and very delicate fabrics. Pro‐ Rinse (1400 - 400) gramme for rinsing and spinning the laundry.
  • Page 16 Programme Reference Maxi‐ Programme description Default tempera‐ spin speed (Type of load and level of soiling) ture Spin speed load Temperature range (rpm) range 1400 rpm 9 kg White cotton items. This high-performance wash program Hygiene (1400 - 400) combined with steam vapour, removes more than 99,99% of 60 °C bacteria and viruses keeping the temperature above 60°C...
  • Page 17 Programme ■ ■ ■ Rapid 20min ■ ■ ■ ■ ■ Rinse ■ ■ ■ Spin/Drain ■ ■ ■ ■ ■ ■ Jeans ■ ■ ■ ■ ■ ■ Sport ■ ■ ■ Silk ■ ■ ■ Duvet ■ ■ ■...
  • Page 18: Settings

    Programme Universal Liquid Univer‐ Liquid for col‐ Delicates Special oureds woolens powder 1) ▲ ▲ Outdoor ▲ ▲ ▲ Hygiene Eco 40-60 ▲ ▲ ▲ At temperature higher than 60 °C the use of powder detergent is recommended. ▲ = Recommended -- = Not recommended 9.2 Woolmark Wool Care - Blue The wool wash cycle of this machine has been approved by...
  • Page 19: Before First Use

    10.3 Permanent Extra Rinse With this option you can permanently have an If the procedure does not work (due to extra rinse when you set a new programme. timeout, wrong programme dial position or wrong keys combination), switch the • To activate/deactivate this option , hold appliance off and repeat sequence from down the Prewash button until relevant the beginning.
  • Page 20 3. Press the On/Off button for a few CAUTION! seconds to activate the appliance. A short tune sounds. Make sure that no laundry gets caught between the seal and the door to avoid 12.2 Loading the laundry risk of water leakage and damage to the laundry.
  • Page 21 -Always follow the instructions that you find on the packaging of the detergent products, but we recommend that you do not exceed the maximum indicated level This quantity will however guarantee the best washing results. -After a washing cycle, if necessary, remove any detergent residue from the With the flap in the position DOWN: detergent dispenser.
  • Page 22 Changing the delay start after the countdown has started If a selection is not possible an acoustic signal sounds and the display shows To change the delay start: 1. Touch the Start/Pause button to pause the appliance. The related indicator 12.6 Starting a programme flashes.
  • Page 23 12.9 Interrupting a programme and changing the options If the temperature and level of the water When the programme is running, you can in the drum are too high and/or the drum change only some options: is still rotating you should not open the door.
  • Page 24: Hints And Tips

    2. Make sure that the drum is empty. 4. Press the On/Off button for a few 3. Keep the door and the detergent seconds to deactivate the appliance. dispenser slightly ajar to prevent mildew 12.14 Stand-by function and odours. The Stand-by function automatically 12.13 Draining water out after end deactivates the appliance to reduce the of cycle...
  • Page 25 a. interrupt the programme and open the • Use only detergents and other treatments door (refer to "Daily Use" chapter); specially made for washing machines. b. manually redistribute the load so that First, follow these generic rules: the items are spaced evenly around –...
  • Page 26: Care And Cleaning

    13.5 Water hardness programmes helps to reduce energy and water consumption. If the water hardness in your area is high or • With adequate pre-treatment, stains and moderate, we recommend that you use a limited soiling can be removed; the water softener for washing machines.
  • Page 27 CAUTION! Do not clean the metal surfaces with chlorine-based detergent. 14.4 Descaling If the water hardness in your area is high or moderate, we recommend that you Clean it when needed, using ammonia cream use a water descaling product for cleanser agent without scratching the seal washing machines.
  • Page 28 1. Open the drawer. Press the catch 4. Insert the detergent drawer into the guide downwards as indicated in the picture rails and close it. Run the rinsing and pull it out. programme without any clothes in the drum. 2. Remove the top part of the additive compartment to aid cleaning and flush it 14.9 Cleaning the drain pump out under running warm water, to remove...
  • Page 29 Proceed as follows to clean the pump: 180˚ ENGLISH...
  • Page 30 WARNING! Make sure that the impeller of the pump can rotate. If it does not rotate, contact the Authorised Service Centre. Make sure also that you tighten the filter correctly to prevent leakages. 14.10 Cleaning the inlet hose and the valve filter It is recommended to clean both filters of the inlet hose and valve occasionally to remove any deposit collected over time.
  • Page 31: Troubleshooting

    WARNING! Make sure that the temperature is higher than 0 °C before you use the appliance again. The manufacturer is not responsible for damages caused by low temperatures. 15. TROUBLESHOOTING WARNING! WARNING! Refer to Safety chapters. Deactivate the appliance before carrying out any check.
  • Page 32 • Make sure that drum doors are properly closed. The appliance drum doors are open or not closed cor‐ rectly. • Wait until mains supply is stable. The mains supply is unsta‐ ble. • Disconnect the appliance and close the water tap. Contact the Authorised Service Centre.
  • Page 33: Consumption Values

    Potential failures Possible solution • Make sure the levelling of the appliance is correct. Refer to "Installation in‐ struction". The appliance makes an un‐ • Make sure that the packaging and/or the transit bolts are removed. Refer to usual noise and vibrates. "Installation instruction".
  • Page 34 Remaining moisture at the end of spinning phase. The higher is the spin speed, the higher is the noise and the lower is the remaining moisture. Values and programme duration may differ depending on different conditions (e.g. room temperature, water temperature and pressure, load size and type of laundry, supply voltage) and also if you change the default setting of a programme.
  • Page 35: Quick Guide

    Programme rpm 1) Litres hh:mm °C Delicates 0.35 60.0 1:25 35.00 1200 30°C Wool 0.30 70.0 1:05 30.00 1200 30°C Reference indicator of the spin speed. Suitable for washing heavily soiled textiles. Suitable for washing lightly soiled cottons, synthetic and mixed fabrics. It also performs as quick washing cycle for lightly soiled laundry.
  • Page 36: Environmental Concerns

    Clean the filter regularly, especially if the alarm code appears on the display. 17.3 Programmes Programme Load Product description 9 kg White and coloured cotton fabrics. Ideal for normal and heavy soil. Cottons 4 kg Synthetic items or mixed fabric items. Synthetics 2 kg Delicate fabrics such as acrylics, viscose, polyester items.
  • Page 40 135956570-A-122024...

Table of Contents