Before operating the pump look and see if there is any damage to the pump adjustable pressure limiting valve. (especially to the power cable and plug). v In case of damage, please have the pump checked by our GARDENA Service Centre. Personal safety 1.
GARDENA Hose Clamp Art. 7192 / 7191. 8. Without fixed installation: Lift up the delivery hose just behind the If very fine dirt is present, we recommend the use of a GARDENA Pump pressure outlet. preliminary filter Art. 1730 / 1731 in addition to the integrated filter.
The suction process can take up to 6 min. If no water is pumped (14) 3. Loosen the cover of the check valve with a suitable tool. afterwards, the pump will shut down automatically and display 4. Remove the check valve (15) and clean it under running water.
9. Start the pump (see 3. OPERATION). Error-LED flashes The pump does not pump water for 30 seconds during the NOTE: For any other malfunctions please contact the GARDENA service 3 times (with a 2 second current operation. department. Repairs must only be done by GARDENA service departments break) or specialist dealers approved by GARDENA.
Husqvarna provides a manufacturer’s warranty against faulty workmanship in manufacture and / or defective components to initial purchaser for each new GARDENA branded product produced by Husqvarna and purchased in Australia. To make a valid claim under this manufacturer’s warranty the product and proof of purchase must be provided to the retailer.
Need help?
Do you have a question about the Classic 3500/4 and is the answer not in the manual?
Questions and answers